|
EAGLE users can upload files to this directory to
share them with other EAGLE users.
CadSoft Computer is in no way responsible for any problems users might encounter with files downloaded from this directory. In case of a problem with the contents of one of these files please contact the person who has uploaded the file directly via email.
|
||||
|
Sorted by name (sort by time).
|
||||
| Filename | Description | Size | Downloads | Timestamp |
0tr_auto.ulp |
Dieses ULP verhindert in markierten Bereichen, dass Pins in der Top-Ebene verbunden werden. Uploaded by Martin Schnell (hey dot doc at |
2,394 |
9,195 |
2000-04-01 13:58:10 |
0tr_autov12.ulp |
Eagle 4.x: Dieses ULP ist eine Hilfe für jeden, der vor das Problem gestellt ist, dass er z.B. Stiftleisten nicht von oben belöten kann. Dieses Programm zeichnet Rechtecke im "tRestrict" um die Pins, die durch ein Rechteck in einem bestimmten Layer markiert sind.
NEU: Nun werden auch die Shapes xlongoct und ylongoct unterstuetzt. Uploaded by Marc Dressler (dressler at |
3,083 |
6,197 |
2001-06-02 12:33:17 |
4quad.ulp |
This ULP generates a table of part positions (*.4qd), that can be used for programming SMD placement machines.
Uploaded by Sven Petersen (s dot petersen at |
1,018 |
6,622 |
2003-11-03 17:01:56 |
acis-sat.ulp |
ACIS-SAT exports an ACIS model of the PCB as a Standard ACIS Text (SAT) file in units of inches. The ACIS model includes a 1/16" thick cuboid (rectangular slab) with holes. Importing this type of model into a CAD package is useful for enclosure design. The vector-based nature of the file enables importing CAD packages to support snapping to PCB features including hole centers. Many 3D CAD packages support SAT files including AutoCAD, Inventor, CADKEY, Solid Edge, SolidWorks, IronCAD and more.
Uploaded by Ed Slatt (ed dot slatt at |
16,632 |
6,582 |
2007-07-19 15:38:57 |
add_attrib_lbr.ulp |
a ULP to add an attribute to all devices in an opened library
Uploaded by Maurice SAAB (morisaab at |
711 |
1,823 |
2011-07-02 18:53:01 |
addjunctions.ulp |
Eagle ULP to create a script which adds junctions to a schematic to remove the ERC missing junction warnings.
Uploaded by Bill Auerbach (bill at |
3,636 |
7,182 |
2001-08-14 17:29:01 |
adimv2_00.ulp |
OK. This is the one ! It does it the efficient way. Please let me know about any features you want to be adjusted/added to this program.
I can also write other ULP for specific tasks. Just let me know, it's free !!! Uploaded by Michel Dagenais (jcmae at |
13,026 |
6,232 |
1998-09-13 05:25:47 |
adimv2_01mm.ulp |
This ULP program will put all the necessary dimensions for holes (layer 45) and board outline (arcs and wires on layer 20) on your board -> in mm. Uploaded by Klein (info at |
12,888 |
5,765 |
1999-11-01 20:00:36 |
adimv3_0in.ulp |
This ULP program will put all the necessary dimensions for holes (layer 45) and board outline
(arcs and wires on layer 20) on your board -> in inches. AND IN THE DIRECTORY OF YOUR CHOOSING WITH THE NAME OF YOUR CHOOSING.
Uploaded by Jeffrey T. Moore (engineer at |
13,713 |
5,377 |
2001-02-12 20:43:01 |
adimv3_0mm.ulp |
This ULP program will put all the necessary dimensions for holes (layer 45) and board outline
(arcs and wires on layer 20) on your board -> in mm. AND IN THE DIRECTORY OF YOUR CHOOSING WITH THE NAME OF YOUR CHOOSING.
Uploaded by Jeffrey T. Moore (engineer at |
13,573 |
5,483 |
2001-02-12 20:37:51 |
adimv4_0in.ulp |
THIS ULP SAME AS ADIMV3.0IN (DIMENSIONS
BOARDS)BUT CHANGED "ARCS" TO "WIRES" SO IT WOULD WORK WITH EAGLE 4.1 Uploaded by S. KRINER (skriner at |
13,714 |
6,943 |
2005-03-04 16:08:57 |
adimv4_0mm.ulp |
THIS ULP SAME AS ADIMV3.0mm (DIMENSIONS
BOARDS)BUT CHANGED "ARCS" TO "WIRES" SO IT WOULD WORK WITH EAGLE 4.1 Uploaded by S. KRINER (skriner at |
13,574 |
8,111 |
2005-03-04 16:07:11 |
adjust_net_names.ulp |
This ULP moves the net/bus names so that they do not rest directly on the wire. This helps to better discern an E from an F, for example. This version corrects pathname problem, the error where Eagle sometimes chooses the wire first rather than the text, and now works on busses as well as nets.
Uploaded by Kevin Callan (kevin dot callan at |
1,743 |
7,887 |
2003-10-22 16:37:19 |
align.ulp |
Aligns board components in group or listed at the
command line. Auto detects direction. (Major bugfix)
Uploaded by Danny Damhave (dd at |
7,974 |
3,640 |
2010-05-28 15:54:38 |
apg.ulp |
Autoplace by Group.
apg.ulp places components on the PCB in the relative
positions they have within the selected group on the
schematic sheet. A dialogue box sets scale & x,y base
positions. An ini file stores the last scale & offset
values, to aid interactive placement.
This ULP is a refinement of aps.ulp.
Uploaded by Jim Meech (jim dot meech at |
5,118 |
2,902 |
2011-04-26 16:14:00 |
aps.ulp |
Auto place sheet: aps.ulp.
Place components on PCB as they are arranged on the schematic sheet. Enter sheet number,scale & x,y base point for the sheet, in dialogue. the last settings are stored in .ini file to aid interactive placement. Based on autoplace-3.ulp Uploaded by Jim Meech (jim dot meech at |
4,521 |
3,341 |
2011-02-14 18:02:16 |
arg.ulp |
Autorote group that is selected in
either schematic or board. Nets can be
excluded in dialogue & saved in .ini
file. A rip up script is automatically
generated.
Uploaded by Jim Meech (jim dot meech at |
4,778 |
1,799 |
2011-05-27 17:06:02 |
array-qfpsmd.zip |
This ULP automates the process of creating surface mount quad flat pack
arrays. Unzip to ULP directory.
Uploaded by George C Blat (georgeb at |
2,484 |
6,321 |
2003-11-04 00:33:33 |
array-rectqfp.zip |
This ULP creates all the SMD pads for a rectangular (non-square) QFP. Unzip to the ULP directory.
Uploaded by George Blat (georgeb at |
3,130 |
6,187 |
2003-11-05 22:37:09 |
array-smds.zip |
This ULP may allows you to make library a little easily, when you want to define packages which has many SMDs. THIS FILE IS ZIP ARCHIVE. YOU NEED TO EXTRACT FILES BY ZIP-EXTRACTOR.
Uploaded by Hideaki Shishido (gnr889 at |
3,185 |
6,481 |
2002-10-31 00:57:15 |
array_board_v4.ulp |
This ulp panalizes a board, allowing you to enter the number of boards, array size, and duplicating signal names.
Uploaded by Todd Beyer (tbeyer74 at |
13,747 |
5,584 |
2007-08-29 17:57:11 |
array_board_v52.zip |
This ULP create an array of a previously created board, just place markers MRK_DOWN_LEFT,MRK_DELTAX, MRK_DELTAY around your block, also place components NBR_MODX, NBR_MODY and give them the appropriate value, that's all. Modules are added in the same board
Uploaded by Maurice SAAB (morisaab at |
92,638 |
4,729 |
2008-11-06 09:03:10 |
arrowhead.ulp |
Converts lines to arrows by adding a calculated arrow head pointing in the requested direction. May be helpful in dimensioning fab drawings.
Uploaded by Alex Faveluke (alex at |
10,566 |
3,480 |
2010-03-31 07:31:29 |
attbom.zip |
Attbom.ulp generates a text + html
BOM,with many attributes, for import
into the Attribute BOM.xls spreadsheet.
The spreadsheet includes functions to
generate a back annotations script which
can be used to apply attributes to the
schematic.
Edditing of attributes is far easier in
a spreadsheet than with the Eagle
attribute editor.
A fully attributed example schematic &
spreadsheet parts list is included.
Spreadsheet includes by part & by value
views.
Uploaded by Jim Meech (jim dot meech at |
3,273,629 |
3,288 |
2010-12-16 15:01:29 |
attrib-add.ulp |
This ULP allows you to quickly add attributes (part #'s, temp codes, etc) to parts in schematics. Select the part(s) with the group command, execute this ULP and select or enter the attribute to add. Attach this ULP to a keystroke or menu item for quick access.
Uploaded by Bob Starr (rtzaudio at |
7,275 |
3,867 |
2010-02-14 01:00:01 |
autonet.ulp |
This ULP connects pins to nets on a schematic based on command arguments or a net definition file. The purpose is to speed up attaching multiple pins to nets and reduce errors. Allows for specifying net lengths, bend styles and net classes. Works across multiple sheets in a schematic.
Uploaded by Alan Samet (alansamet at |
13,808 |
6,073 |
2004-08-20 16:12:12 |
autoplace_v3.ulp |
Crude autoplace ULP, adaptation of Cadsoft original IIRC. v4 compatible, creates grouping based on SCH and handles multiple sheets
Uploaded by David Moodie (dgmoodie at |
2,222 |
14,996 |
2003-01-23 14:04:18 |
autoroute_classes.ulp |
Specify the classes to autoroute. Useful for autorouting multilayer SMT boards where the supply classes are routed first, then the analog classes, then the rest.
Uploaded by Ed Anuff (ed at |
3,353 |
7,643 |
2004-06-03 06:13:48 |
b_cnc.ulp |
Bohrdaten und Board-Outline zur
weiteren Aufbereitung für CNC Uploaded by Anton Riedl (df6co at |
1,963 |
7,101 |
1999-09-10 10:46:19 |
bga_via.ulp |
Creates BGA packages with offset via's and trace between
Uploaded by Jim Thurman (jthurman at |
9,383 |
5,440 |
2006-12-20 00:02:29 |
bga_vias_brd.ulp |
Creates a script file which adds offset via's and traces to BGA's on a board.
Uploaded by Jim Thurman (jthurman at |
13,198 |
5,250 |
2006-12-20 00:03:30 |
bom-am-14.zip |
A database with additional information like order codes, manufacturers or prices can be created and managed. Other features include board statistics, etc.
Uploaded by Robert A. Rioja (robert at |
46,056 |
4,535 |
2008-08-11 14:16:19 |
bom-am-15.zip |
A database with additional information like order codes, manufacturers or prices can be created and managed. Other features include board statistics, etc. Corrects bugs found in version 14.
Uploaded by Robert A. Rioja (robert at |
48,163 |
4,707 |
2008-09-11 14:05:09 |
bom-am-16.ulp |
A database with additional information like order codes, manufacturers or prices can be created and managed. Other features include board statistics, etc. Corrects bugs and added features to version 15.
Uploaded by Robert A. Rioja (robert at |
170,701 |
4,405 |
2009-03-17 18:22:39 |
bom-am-17.zip |
Creates and manages databases with additional information like order codes, manufacturers, prices, etc. Other features include board statistics, etc. Corrects bugs from previous version 16.
Uploaded by Robert A. Rioja (robert at |
48,752 |
5,557 |
2009-05-13 14:12:54 |
bom-am-18.zip |
Bill Of Materials And More. Manages databases with additional info like part numbers, manufacturers, etc. Many other features include board statistics, input & output controls, and much more. Replaces BOM-AM-17.
Uploaded by Roebrt A. Rioja (rrioja at |
53,357 |
2,728 |
2011-06-07 15:19:45 |
bom-ex.zip |
Latest 1.30 version of BOM-EX. A full BOM system for Eagle using attributes.
Uploaded by Bob Starr (rtzaudio at |
4,000,142 |
2,566 |
2011-07-01 06:50:00 |
bom2.ulp |
produces a part list with extension .BO9 suitable for PARTS AND VENDORS part-list
manager program. Uploaded by NIKOS CHALIKIAS (nx at |
2,291 |
9,472 |
1998-01-11 14:12:38 |
bom3.ulp |
BOM2.ULP
Adds semicolons as delimiters to a BOM text file
for easy importing into Spreadsheets.
Uploaded by Lawrence Lile (llile at |
18,062 |
6,128 |
2002-09-09 17:08:25 |
bom3_csv_v2.ulp |
Modified version of bom3.ulp that can output the Bill of Materials in 2 additional formats: CSV (i.e. comma-separated) and CSVExcel (MS Excel/Access compatible comma-separated). This copy fixes a bug in bom3_csv.ulp that I just uploaded.
Uploaded by Benjamin West (keensmack at |
21,489 |
7,795 |
2003-09-25 20:00:52 |
bom4.ulp |
Lightly modified version of bom.ulp to allow me to define database entries for devices <b>with</b> value:on but where the value doesn't matter. For example, connectors where the value is used as an identifier.
Uploaded by Robert Pearce (rob at |
25,267 |
6,085 |
2006-04-16 21:20:15 |
bom5.ulp |
Added command line parameter for database location so you can run it like this:
run bom.ulp 'c:\path\to\partsdb.tsv'
Uploaded by Joris Aerts (jorisaerts at |
26,081 |
4,492 |
2008-12-07 10:57:49 |
bom_tb.zip |
Bill Of Material seperated Top & Bottom
Stueckliste nach Top und Bottom getrennt Uploaded by A. Zaffran (alf at |
1,157 |
7,040 |
2000-04-20 09:35:40 |
bom_thr.zip |
BOM Erstellung mit verschiedenen Ausgabeformaten mit zusätzlichen vordefinierten Attributen "VALUE2", "VALUE3", "PARTNO".
Uploaded by Thomas Riedger (thomas dot riedger at |
7,003 |
4,269 |
2010-07-02 09:01:30 |
bom_with_attributes.zip |
This zip-file contains a new (V1.03)bom_w_attr.ulp and a sample which use the new attribute features instead of a database. New revision with added description column in "Values-Mode".
Uploaded by Carsten Wille (eagle38106 at |
16,575 |
5,757 |
2010-04-17 21:05:18 |
bom_yum.ulp |
BILL OF MATERIAL; improved version of PART.ULP
Uploaded by Reinhard Dämon (r dot daemon at |
4,488 |
6,045 |
2002-08-29 15:03:52 |
cam2image.zip |
Use CAM-Job as menue for EXPORT Image-File(s). BMP, PNG...
Uploaded by A. Zaffran (alf at |
5,583 |
7,408 |
2003-09-08 08:59:43 |
card_edge_board_fingers_(generic_inch).ulp |
This ULP generates a script which, when run in a library editor window, creates generic card edge board fingers (inch dimensions), with two key symbols per "device" (keys added to schematic by REQUESTing them. The keys are NOT automatically added to the generated board; they must be added manually).
The ULP (written for 4.09r2) is fairly well documented. Feel free to modify it for your specific finger spacings/sizes.
Uploaded by Thomas Barlet (royalheart at |
9,452 |
8,843 |
2003-12-13 16:35:16 |
centroid_screamingcircuits_smd.ulp |
This ULP creates the specific format surface mount XY location file, called a Centroid file, required by Screaming Circuits for prototype assembly. Simply run this ULP and include the generated file “<project-name> centroid.csvö in the zip file containing your BOM and Gerbers when you order prototype pcb assembly at www.ScreamingCircuits.com.
Uploaded by Duane Benson (dbenson at |
1,395 |
5,996 |
2006-05-18 17:06:38 |
change-pad-in-lbr.zip |
This ULP changes shape, diameter, and drill diameter of all pads in a library
Uploaded by A. Zaffran (alf at |
3,080 |
7,454 |
2001-07-16 15:50:47 |
change-prefix-in-lbr.ulp |
Change device prefixes in a library to a new value.
Uploaded by Bob Starr (rtzaudio at |
1,669 |
9,023 |
2005-11-07 04:40:57 |
change-symbol-pinname-char.ulp |
Replaces a character in pin names for all symbol pins in a library to a new character (e.g. RESET\ to RESET#).
Uploaded by Bob Starr (rtzaudio at |
1,922 |
8,015 |
2007-06-30 04:18:34 |
change-text-in-lbr.ulp |
This ULP scans through all packages and changes the text size/ratio for items on the tName, tValue and tPlace layers.
Uploaded by Bob Starr (rtzaudio at |
3,402 |
11,071 |
2005-02-07 03:09:46 |
change-text-to-vector-in-lbr.ulp |
This script loops through all Symbols and Packages in a library and changes Font of any text it finds to Vector. All the text in Eagle libraries are made in the Proportional font, which frequently causes problems while using CAM Processor - CAM Processor automatically converts all the text to Vector font, which frequently causes parts' Names and Values to shift slightly and overlap with something around at the output. By converting all the text in libraries to Vector font, these problems are eliminated at its source. This program is based on "change-text-in-lbr.ulp" by rtzaudio@mindspring.com
Uploaded by Pavel Hanak (hanak dot pavel at |
1,872 |
6,602 |
2006-01-09 12:53:01 |
change_libraries_to_olimex_drills.zip |
Ersetzt Bohrdurchmesser in Bibliotheken durch Olimex-Standardgrößen.
Erhöht anhand einer Liste in der ULP die Durchmesser normalerweise zusätzlich um 0,1mm, damit Durchkontaktierungsverluste ausgeglichen werden.
Die Liste ist leicht editierbar.
Ürsprüngliche Datei: round_drills_mm_all_.zip von Rindert Nauta
April 2006 siegfriedschwemmer web de
Uploaded by Siegfried Schwemmer (siegfriedschwemmer web de) |
3,160 |
6,469 |
2006-04-30 16:15:26 |
change_prefix.ulp |
Updated 28 MAR 2003 [written for V4.11]
Includes a fix for a bug that caused devices to be created without packages and symbols.
This ULP opens a dialog box that requests the prefix to change and the new prefix. It then opens each library in turn, checks each device for the old prefix, and if found, changes it to the new prefix. Note that the prefix is changed using a script file that is automatically run after all libraries are scanned. Uploaded by Thomas Barlet (royalheart at |
3,847 |
7,758 |
2004-03-30 04:13:57 |
chkpin01.zip |
CHKPIN01.ULP
checks the placement of gates/pins (default Grid) in the schematic
testet die Plazierung (default Grid) der Gates/Pins im Schaltplan
SNAPSCH.ULP
snap the symbols of the current shematic to default grid (0.1 Inch)
generiert ein Script um die Symbole im aktuellen Schaltplan auf das Default-Grid zu setzen Uploaded by A. Zaffran (alf at |
3,464 |
5,550 |
1999-10-06 11:41:00 |
chnwidth2.zip |
This ULP generates a script file "chnwidth.scr' that changes the wire width select in MM MIL INCH.
Dieses ULP generiert ein Script "chnwidth.scr" das die Leiter- bahnbreite abhaengig vom Netznamen und Min- Max- Breite aendert.
Das Auswahlkriterium 'Netzname' kann jetzt abgeschaltet und es kann zwischen MM MIL und INCH gewaehlt werden. Uploaded by A. Zaffran (alf at |
1,982 |
5,848 |
2000-04-05 16:20:59 |
circle_2.ulp |
Generates manual placement guide circles, draws circles around selected components.
Uploaded by Jonas Qvarnström (jqm at |
7,234 |
5,312 |
2003-05-20 19:13:22 |
cmd-change-brd-width.ulp |
After running the ulp display the same layers as before (starting the ulp)
Uploaded by A. Zaffran (alf at |
7,393 |
4,086 |
2008-06-04 16:17:53 |
cmd-change-swap-layer.zip |
Change and swap (copper) layer. Version 4.1
Uploaded by A. Zaffran (alf at |
1,973 |
5,995 |
2003-11-27 10:06:59 |
cmd-change-wire-width.zip |
This ULP changes the wire width of certain signals in a board and do have a wire width in between the minimum and maximum values.
Uploaded by A. Zaffran (alf at |
1,942 |
6,192 |
2003-02-12 09:38:05 |
cmd-change-wire-width2.ulp |
Iterates through all traces widths on a board and changes traces of a particular width to a new width. The compare is based on the existing width rather than signal names.
Uploaded by Bob Starr (rtzaudio at |
4,508 |
6,678 |
2007-06-30 04:20:35 |
cmd-draw.zip |
Functions to draw line, place elements on circle/ellipse.
Uploaded by A. Zaffran (alf at |
64,913 |
5,644 |
2006-08-30 08:20:29 |
cmd-net-list2sch.zip |
Import an EAGLE-Net-List into a schematic, or use in command line, see header.
Uploaded by A. Zaffran (alf at |
3,022 |
6,156 |
2002-11-04 11:43:30 |
cmd_netscript.zip |
Mit diesem ULP kann ein NetScript in den Schaltplan geladen,
oder als Zeileneingabe benutzt werden, um eine Netzliste als Airwires zu zeichen.
Use this ULP for import a Netscript in Schematic. Uploaded by A. Zaffran (alf at |
2,815 |
12,418 |
2002-01-30 10:43:51 |
cmd_snap_schematic_1_1.zip |
Snap schematic to grid. New version of cmd_snap_schematic.ulp which doesn't run properly from EAGLE 4.01 on. Uploaded by Rudi Hofer (rudi dot hofer at |
2,413 |
6,661 |
2001-03-05 12:43:19 |
cnc-drill.ulp |
Erstellt ein CNC drill file
Uploaded by Norman Urs Baier (norman dot baier at |
5,122 |
6,291 |
2008-04-08 10:29:02 |
connector-pins.ulp |
Export a text file of all connector pin locations (uses reference designator prefix) to compare with a mating board to be sure you have the interfacing connectors in the correct location.
Uploaded by Kevin Callan (kevin dot callan at |
1,217 |
5,531 |
2006-01-10 23:31:21 |
cooltools.zip |
V2.0 of stkdoc.ulp. It creates now 5 Layers. It is now better suited for creating sandwich prints.
V1.0 of zonedoc.ulp. It is for creating zone rulers and a partlist file with zone information.
Uploaded by Martin Bammer (e9525103 at |
3,707 |
5,739 |
2001-06-10 16:27:11 |
copy-outline-to-milling.ulp |
copy-outline-to-milling.ulp
Copies all WIREs and ARCs on layer 20 (Dimensions) to layer 46 (Milling), including those that are embedded in packages. This allows you to edit the contour milling layer that you export to Gerber, to add or remove segments, to optimize it, or to modify segments that are originally in a package, and thus not modifiable directly. Export layer 46 (Milling) in the CAM processor as you contour routing outline (board cutout). Uploaded by Tennessee Carmel-Veilleux (veilleux at |
5,318 |
6,148 |
2007-08-20 16:26:11 |
copy-wire-to-solder-mask.zip |
Copy Signal-Wire and/or Polygon to Stop-Layer
Uploaded by A. Zaffran (alf at |
2,505 |
5,896 |
2006-01-20 10:23:32 |
copypaste.zip |
copy and paste schematic and board
Uploaded by Benjamin Drung (benjamin dot drung at |
12,170 |
3,700 |
2011-01-23 19:29:12 |
copyplacing-2.ulp |
Copies the placement from one group of parts to another in a board.
Updated version of copyplacing.ulp with new featurs and some bug correction. - Mirror, spin and all degree angles are fully supported and copied. - Multiple source/destination rectangle are fully supported. - Works with different grid sizes other than mil. - MOVE and ROTATE commands use names instead of coordinates - Improved search engine to reduce the risk of failure or error. Uploaded by Salvatore Previti (info at |
6,280 |
5,812 |
2007-12-01 04:07:48 |
copyplacing.ulp |
Copies the placement from one group of parts to another in a board.
Uploaded by Jörg Krein (rekisum at |
5,865 |
6,172 |
2004-08-09 14:18:45 |
count.ulp |
Counts Pads, Vias, Smds and Holes in a layout. Uploaded by Richard Hammerl (ric at |
1,021 |
5,684 |
2000-09-28 09:08:43 |
cp40_xymm.ulp |
dieses ULP kann die Cad Koordinaten in ein Samsung(CP20,40,45,60,55,SM320) File (ASCII) exportieren
Uploaded by Manfred Helbing (manfred dot helbing at |
893 |
6,168 |
2005-03-31 10:11:18 |
cplayout.ulp |
A ulp that copies the layout from one project to an other. Needs some work on signals names and Ref-Des's
Uploaded by Tom Morrison (tmorrison at |
1,853 |
5,273 |
2002-04-18 15:36:13 |
create-frame.ulp |
This User Language Program asks the user to fill in their drawing information like paper size and perforation space description etc. and draws a drawing template with info box.
Uploaded by Richard Bekking (richard dot bekking at |
8,893 |
6,079 |
2005-11-23 11:30:29 |
create-frame_v1.0.2.ulp |
Update to the excellent create-frame.ulp that includes 8.5x11 and 11x17 paper sizes. Nonmetric Traditional sizes are added to bottom of selection list in the interests of international relations. :)
Uploaded by Eric Pratt (eric dot b dot pratt at |
9,626 |
5,731 |
2007-05-14 09:20:20 |
create_drill_line_array1.21.zip |
Creates a line of holes or vias along an arbitrary path. Options for a trace with specified width/exposure which follows the line of vias. The vias can be spaced by total number for the guide path, or by distance between vias.
Uploaded by James Connors (jamessconnors at |
20,987 |
4,720 |
2007-12-07 21:25:32 |
deldevsympac.ulp |
Delete devices and unused
packages/symbols from a opened library.
Based on a CadSoft version, but uses
dlgCheckBox instead of dlgTextEdit
dialogs.
Uploaded by Frederic Mantegazza (mantegazza at |
5,373 |
5,772 |
2001-09-21 16:52:10 |
dif40.zip |
Generates output in DIF 4.0 format.
This format is used for production and test purposes. It has been defined by Digitaltest GmbH.
This version corrects the month value in exported data. Uploaded by A. Zaffran (alf at |
3,631 |
5,556 |
2004-08-31 13:24:01 |
docfield.zip |
This ULP can be used to automate filling out a frames docfield.
Dieses ULP kann verwendet werden, um das Docfield eines Rahmens automatisiert auszufüllen. Uploaded by René König (rk at |
11,859 |
6,724 |
2005-05-23 14:28:06 |
doublelayermodelamillanddrill.zip |
Double layer, through hole PCB
manufacturing for Roland Modela 3D-plotters used in Fablab's all over the world.
Uploaded by Oswald van Ginkel (oswald dot vanginkel at |
24,272 |
2,154 |
2011-03-26 12:17:12 |
drawdesignerinfo.ulp |
DrawDesignerInfo.ulp
This ULP has a GUI to help you draw the Manufacturing Info (Name, Contact, Layer Name, etc) on all the required layers for Gerber exports. The GUI is easy to use and configurations can be loaded and saved, for reuse between projects. This ULP is production tested with over 50 boards and 4 board houses. All of the manufacturers are satisfied with the normalized presentation of the information at the same place on every layer. Uploaded by Tennessee Carmel-Veilleux (veilleux at |
23,596 |
5,246 |
2007-08-20 16:42:36 |
drawpoly.ulp |
Draw a circle with the number of pins specified on the command line, eg:
RUN drawpoly.ulp <nsides> <radius>
Uploaded by Bill Eichin (weichin at |
610 |
5,082 |
2002-06-22 16:35:31 |
drilegend.ulp |
DRILEGEND.ULP for eagle 4.04 is the new version of "driltabh.ulp".
It create a drill legend for add in your board.
There is a lot of new functions: horizontal or vertical legend, choice of layer and size for symbols and texts, ranks for fields, editable title fields, precision, mils, milimeters, microns, quantity, plated, tolerance, and more...
Uploaded by Christian Bohrer (c dot bohrer at |
36,290 |
5,605 |
2002-04-12 22:18:15 |
drill-aid-delete.ulp |
deletes circles created by drill-aid.ulp
Uploaded by Jan Bartels (j dot bartels at |
1,176 |
6,005 |
2005-02-19 17:36:02 |
drill-aid.ulp |
I have improved the drill-aid.ulp with a checkbox, which allows you to delete all existing elements automatically from the centerDrill layer before adding the new circles.
Uploaded by Márton Miklós (martonmiklosqdev at |
2,553 |
3,476 |
2010-08-11 21:12:44 |
drill-aidy.ulp |
drill-aid for component- and solderside.
Uploaded by Jorn Riis (suhrole at |
4,681 |
3,517 |
2010-03-26 08:12:23 |
drill-legend.zip |
Place a drill legend on Layer 144 Only for Eagle Version 4.11 or higher.
Version check fixed
Uploaded by A. Zaffran (alf at |
2,663 |
8,198 |
2004-06-04 08:30:49 |
drill-ring.ulp |
Basierend auf drill-aid erzeugt dieses ulp Ringe um Pads, Vias und Holes um für manuesses Bohren größere Restrunge als in den Libs vorgesehen zu erzeugen. Legt die Ergänzung in Layer 117 ab. Kann mit drill-aid kombiniert werden.
Uploaded by Arnold Hübsch (arnold at |
3,181 |
4,270 |
2009-01-26 23:01:47 |
drill_gc.ulp |
This EAGLE User Language Program generates a drill configuration file for the current board, which can be used as ASCII rack-file in GC-PREVUE.
The main body was taken from DRILLCFG.ULP.
Uploaded by Reinhard Daemon (r dot daemon at |
1,568 |
5,538 |
2002-06-24 09:55:54 |
drillcount.ulp |
Show a simple list of drill sizes and counts, plus how many are used for vias. Use as a "sanity check" for odd drill sizes.
Uploaded by Alan Stummer (astummer at |
2,650 |
6,187 |
2006-04-26 15:26:31 |
drillegend-2.ulp |
Updated version of drillegend.ulp that corrects a problem with the
DRILLRACK.DRL file where drills may be missing if they are similar in
size to others when the selected units are inches.
Uploaded by Steven Pelletier (steven at |
43,905 |
3,660 |
2010-02-23 00:28:37 |
drillegend.ulp |
Place now correct symbols.
Renamed drillegend4x.ulp to drillegend.ulp Uploaded by A. Zaffran (alf at |
43,803 |
4,345 |
2008-07-30 12:09:37 |
drillegend4x.ulp |
extended version of drillegend.ulp from Christian Bohrer
You can extend the symbol list below the line: ARRAY OF EAGLE DRILL SYMBOLS in the source text of this ULP. Uploaded by A. Zaffran (alf at |
43,050 |
4,685 |
2007-10-18 14:35:16 |
drillinfo.ulp |
Ever needed to limit your board's drills to a standard drill rack to avoid costs? Eagle does not allow you to change pad drill sizes outside the library - neither does this ULP. BUT at least it lists which part from which library causes the non-standard drill to be listed by drillcfg.ulp. It also counts drills in total and per size. Based on CadSoft's drillcfg.ulp. Revision 2 with bugfix.
Uploaded by Philipp Adelt (eagle at |
4,968 |
6,348 |
2005-09-29 14:57:18 |
drillplan-autodim-update.ulp |
This is an updated version of drillplan-
autodim.ulp. I basically just changed
the commands that were obsolete so that
the ULP could be compatible with
versions after 4.11. It is important
create a folder named temp on the c
drive, for the ULP to function. It is
also important to go to Options -> Set -
> Drill -> Set for the drill plan.
Uploaded by Jorge Garcia 04/07/2010
original code by L.Lile.
Uploaded by Jorge Garcia (jorge dot garcia at |
22,455 |
3,590 |
2010-04-07 23:06:29 |
drillplan-autodim.ulp |
Drillplan and auto-dimension combined. One command "prettys up" your board for documentation, counts holes, counts SMT parts and pads, and automatically dimensions your board. Only available in mm at this time.
Uploaded by Lawrence Lile (nospamllile at |
21,795 |
5,598 |
2003-10-24 19:33:32 |
drillplan.ulp |
Draws a nice drill plan legend with a hole, size, tolerance, and number
of holes for each size of hole on the board. The spread sheet looking
chart is drawn to the right of the board in the .brd file. The total
number of holes is also shown. This ULP creates a script named
DRAWPLAN.SCR located in your design directory. Credit for the original
.ulp goes to Cadsoft. I modified this to fit the standard we use in the
USA. Uploaded by Frank Hoffman (frankh at |
4,029 |
5,315 |
1999-10-20 23:41:05 |
drillplan2_0.ulp |
Draws a nice drill plan legend with a hole, size, tolerance, and number of holes for each size of
hole on the board. The spread sheet looking chart is drawn to the right of the board in the .brd file. The total number of holes is also shown. THIS ULP WILL CREATE A SCRIPT FILE IN ANY DIRECTORY BY ANY NAME OF YOUR CHOOSING.
Credit for the original .ulp goes to Cadsoft. modified this to fit the standard we use in the USA.
Uploaded by Jeffrey T. Moore (engineer at |
4,771 |
5,194 |
2001-02-12 20:54:10 |
drillplan3_0.ulp |
Generates Drill Legends - This version (3.0) adds separate counts for plated holes, and draws table smallest-to-largest to better match drill config files.
Uploaded by Brad Goodman (brad at |
6,102 |
5,373 |
2002-01-30 21:09:57 |
drillplan3_0_mm.ulp |
The same as drillplan3_0 but the diameters are in Millimeters [mm]
Generates Drill Legends - This version (3.0) adds separate counts for plated holes, and draws table smallest-to-largest to better match drill config files.
Uploaded by Richard Hammerl (ric at |
6,128 |
5,549 |
2003-11-06 14:22:50 |
drills1.ulp |
Provides a board stuffing house with componet locations and hole locations by componet. Also lists rotation and package name. Uploaded by Alex Brown (alexb at |
990 |
5,227 |
2000-09-02 00:35:56 |
drills3.ulp |
An updated verson of drills1 that sorts parts by top and bottom placments
Uploaded by Alex Brown (alexb at |
2,188 |
5,108 |
2001-06-14 20:02:50 |
driltabh.ulp |
This ULP place (or refresh) a Drill legend in the board. You must update and sort the ">Option>Setting>Drill" as the drill legend (if necessary).
Uploaded by Christian BOHRER (cao dot azelectronic at |
7,738 |
4,795 |
1999-08-24 14:15:32 |
dumplib.ulp |
ENGLISH: dumps a ULP-library-struct to a textfile while in library-editor
DEUTSCH: gibt aus dem LibEditor ein komplettes ULP-library-objekt in eine textdatei aus
Uploaded by Frank Benkert (fb at |
16,961 |
4,898 |
2002-04-10 15:12:21 |
duplicating_v45.zip |
Duplicate your modules (both sch+brd) very easily, just place markers around blocs, give value to NBR_MOD, and type CTRL+D!!!
Uploaded by Maurice SAAB (morisaab at |
7,034 |
4,980 |
2010-03-17 19:07:12 |
dxf-col0.ulp |
Some drawing programs can't import dxf files that use color number 0. This ULP has been modified to avoid this color number. Requires EAGLE 4.11r05 or higher.
Uploaded by Richard Hammerl (ric at |
47,679 |
8,362 |
2005-04-06 10:19:33 |
dxfblack.ulp |
Dieses ULP erzeugt eine schwarz/weis DXF-Grafik. This ULP generates black/white dxf files. Uploaded by Richard Hammerl (ric at |
17,224 |
7,795 |
2000-05-11 10:50:47 |
eagle2ad_sch.ulp |
This ULP will generate schematics in Protel / Altium format. Version 1.1
Uploaded by Christian Keller (retrochris at |
21,403 |
15,901 |
2009-12-08 10:13:55 |
eagle2kicad-0.9b.ulp |
This ULP converts the symbols and packages of an eagle library to the format of the KiCAD PCB suite. The current version is 0.9b. This Scripts is released under the GNU Public license
Uploaded by Juergen Messerer (juergen dot messerer at |
35,616 |
10,789 |
2006-12-01 08:28:11 |
eagle2kicad_sch.ulp |
This ULP converts the eagle schematic in to the format of the KiCAD PCB suite. The current version is 0.3. This Script is released under the GNU Public license
Uploaded by Juergen Messerer (juergen dot messerer at |
16,892 |
8,462 |
2006-07-16 19:16:02 |
eagle2ps-1.1.ulp |
This script converts eagle schematics to postscript files. The advantage of this script is that you can search for texts. You can also convert it to pdf. Current Version 1.1. License: GNU Public License 2.0
Uploaded by Juergen Messerer (juergen dot messerer at |
27,801 |
5,950 |
2007-02-01 10:12:42 |
eagle2ps_v2.1.ulp |
This script converts eagle schematics to postscript files. Version 2.1 adds the following features: simple output font scaling, Multiple paper sizes (Letter, 11x17, and custom sizes), Portrait and Landscape output, page-scaling (none, shrink-only, fit-to-page), aspect ratio preservation optional, export all layers or only visible layers, reworked ULP dialog window, and various other tweaks and fixes..
License: GNU Public License 2.0
Uploaded by dane walther (dane dot ulp at |
42,976 |
5,381 |
2008-04-29 21:26:58 |
eagle2svg-1.0.ulp |
This ULP converts a schematic into an SVG 1.1 vectorgraphic.
Version: 1.0 License: GNU Public License 2.0 Uploaded by Nils Springob (nils dot springob at |
18,033 |
4,259 |
2008-04-16 11:19:10 |
eagle2svg-1.1.ulp |
This ULP converts schematics and boards to SVG 1.1 vectorgraphic files.
Uploaded by Nils Springob (nils dot springob at |
28,503 |
5,480 |
2008-04-20 18:34:00 |
eagle2svg-1.2.ulp |
This ULP converts schematics and boards to SVG 1.1 vectorgraphic files.
Changes from 1.1: Fixed drill holes, optimized stylesheet generation Uploaded by Henry Institoris (xtitoris at |
27,839 |
2,264 |
2011-07-10 14:07:09 |
eaglelatex.zip |
This ULP generates a figure-file (*.pic) from the schematic drawing for using within LaTeX.
Used packages: epic and eepic. Uploaded by Matthias Haselberger (m dot haselberger at |
132,481 |
5,501 |
2005-07-19 14:56:40 |
eaglespice.zip |
ULP for generating a SPICE netlist for WINSPICE Spice-Engine.
Supports Operating Point, DC Sweep, AC, Transient and Transfer Function Analyse with Parameter and Temperature Sweep. Uploaded by Rudolf Thalbauer (rudolf dot thalbauer at |
35,971 |
6,171 |
2008-11-23 22:43:15 |
eagletogrs.zip |
ULP zur Ausgabe der Eagle-Daten in einem Format, welches direkt von einem Polar GRS500 Flying Probe Testsystem eingelesen werden kann.
Uploaded by Hermann Reischer (hermann dot reischer at |
2,861 |
5,454 |
2003-04-14 23:10:00 |
edit-used-dev-pac-sym.zip |
Offers a selection to open (one of) the respective Library Editor window(s) of the currently edited DEVice/PACkage/SYMbol.
It is also possible to edit a DEVice, PACkage, or SYMbol from Schematic or Board directly. Uploaded by A. Zaffran (alf at |
2,280 |
7,173 |
2005-05-03 15:06:09 |
editgroupedtext.ulp |
gruppierte Texte in einem Schema oder Board können mit diesem ULP als "Block" editiert werden.
Uploaded by Hans Schlumpf (h dot schlumpf at |
6,643 |
1,480 |
2011-06-20 08:05:12 |
eps_export_411.ulp |
Tested for Eagle 4.11. This ULP exports board or schematic to EPS using dialog. Script is based on epscdraw_411.ulp. EPS file is editable by constants.
Uploaded by Filip Kinovic (kinovicf at |
58,502 |
6,380 |
2005-10-12 12:12:32 |
epscdraw.ulp |
This ULP export board or schematic to Color EPS. Program is based on epsdraw.ulp. Edit EPS file (or this ULP) to change color of printed layers in EPS.
Uploaded by Filip Kinovic (kinovicf at |
20,810 |
5,094 |
2004-05-10 15:41:38 |
epscdraw_411.ulp |
Version for Eagle 4.11. This ULP exports board or schematic to Color EPS. Program is based on epsdraw.ulp. Edit EPS file (or this ULP) to change color of printed layers in EPS.
Uploaded by Filip Kinovic (kinovicf at |
22,841 |
5,283 |
2004-10-27 17:27:10 |
epsdraw.ulp |
This ULP export board or schematic to EPS. Program is based on psdraw4.ulp. Edit EPS file to make mirror and/or upside down.
Uploaded by Filip Kinovic (kinovicf at |
14,963 |
5,142 |
2004-05-10 15:35:51 |
excellon.ulp |
This EAGLE User Language Program produces a EXCELLON output file which uses only one Tool (T01)independent of the drill diameter (No drill rack is necessary)It's used for drilling milled boards to reduce the amount of tool changes. Uploaded by G.Datler (datler-stasiuk at |
1,834 |
6,087 |
1999-09-01 15:40:19 |
excellon_2.ulp |
Used to generate Excellon format 2 drill files.
Uploaded by Russell Kliese (russell at |
1,481 |
5,694 |
2002-09-18 06:42:43 |
exp-lbr-pcb.ulp |
Export library packages to PCB footprints. PCB is an interactive printed circuit board editor for the X11 window system.
Uploaded by Ruslan V. Uss (unclerus at |
6,826 |
7,589 |
2010-06-05 06:50:04 |
exp-proj-lbr-man.zip |
Das ULP basiert auf exp-project-lbr.ulp Version 4.1.5. Es enthält viele Verbesserungen und
kann im Schaltplan aus den Bauteilsets alle unbenutzten Gehäusevarianten entfernen.
Update Version 1.07
The ULP is based on exp-project lbr.ulp version 4.1.5. It contains many improvements and can remove all unused package variants from the device sets in the schematic. Update version 1.07 Uploaded by Walter Mücke (hochberg3 at |
21,090 |
5,824 |
2007-12-12 08:46:37 |
exp-project-lbr.ulp |
Corrected rotatoin of RECTangle.
Uploaded by A. Zaffran (alf at |
30,391 |
6,157 |
2006-10-27 09:23:45 |
exp-project-lbr.zip |
Create library or libraries from schematic/board
Correct working path Optional: Create with or without LBR-Name as Prefix ULP-Version 4.1.5 Uploaded by A. Zaffran (alf at |
7,383 |
8,653 |
2005-04-28 09:09:22 |
exp_project_lbr_1_2.ulp |
Export project libraries from schematic or board. Requires version 4 or greater. Substitutes exp_project_lbr_1_1.ulp. Uploaded by Rudi Hofer (rudi dot hofer at |
22,403 |
7,244 |
2001-05-16 11:37:25 |
export-board.ulp |
Run this ULP in your board layout and it will generate a script file that regenerates the board from scratch. This may be useful if you need to make significant library changes or if you need to switch between versions, for example. It is important to run the ULP right after opening the board file. If you do a ratsnest before running the ULP, the polygons will switch from Outline mode to Real mode and they will export as a complicated shape rather than the outline. Also, because of rounding errors many small Airwires may appear in the new board file. These can be deleted in bulk without consequence.
Uploaded by Kevin Callan (kevin dot callan at |
4,859 |
8,178 |
2004-08-02 21:03:49 |
export-import.zip |
This is a set of Export/Import Utilities. This file contains a ULP script file to export the coordinates and rotation of all the components on a Board. Also contained in the file is an Excel file containing two simple macros. One Macro to read the coordinate data generated by the Eagle ULP, and one Macro to generate an Eagle Script file to import the new Coordinates back into Eagle.
This provides a quick and easy way to manipulate the coordinates of the components on a Board. Uploaded by Trevor Kooistra (icecubetray at |
13,167 |
6,532 |
2007-07-24 13:36:07 |
export-protelpcb.ulp |
Export Eagle board to Protel ASCII
format
Uploaded by Alex Galakhov (agalakhov at |
14,636 |
20,764 |
2005-11-03 11:03:11 |
export-schematic.ulp |
Run this ULP in your schematic and it will generate a script file that regenerates the schematic from scratch. This may be useful if you need to make significant library changes or if you need to reorder sheets, for example.
Uploaded by Kevin Callan (kevin dot callan at |
5,471 |
8,293 |
2004-06-18 23:53:24 |
export_boardinfoofeagle.ulp |
This ULP export the information of the Board of EAGLE, Packagues PADs and Text Coordinates
Uploaded by Cesar David (cdavidrp at |
5,609 |
3,787 |
2009-10-27 22:40:28 |
export_cadence_telesis.ulp |
Exports a netlist from Eagle to Allegro.
v1.0 2009/07/27 This ULP exports parts and nets from Eagle schematic into a Telesis netlist that can be imported from Cadence Allegro (File/Import/Logic/Other), and create associated device files for all parts (including swap info). Tested with OrCAD v16.2 Uploaded by Eric HEURTEL (eheurtel at |
12,136 |
4,823 |
2009-10-29 11:23:00 |
extd_erc.zip |
Version 1.4
This EAGLE User Language Program performs several checks on the nets and pins of a schematic. These checks have been implemented as an addition to the builtin ERC, and shall later be incorporated in the editor itself. Pleas read the ULPs header.
Dieses ULP ergaenzt den Electrical Rule Check (ERC). Diese Funktionen werden in einer spaeteren Eagle-Version integriert. Lesen Sie die Info im Dateikopf. Uploaded by A. Zaffran (alf at |
8,803 |
23,546 |
1999-09-28 09:22:11 |
extractclass.ulp |
ExtractClass.ulp
Extracts a list of all nets belonging to specified classes to a TSV file. Command-line ULP that takes the arguments directly from the EAGLE prompt. This ULP allows you to get a list of all the nets in "POWER" or "SENSITIVE", for example, to analyze or list them appropriately. TSV output can be edited with Excel natively or used with programmed scripts (VB, Python, Perl, Tcl, C, etc). Uploaded by Tennessee Carmel-Veilleux (veilleux at |
2,932 |
4,054 |
2007-08-20 16:53:13 |
fabmaster.ulp |
FABMASTER FATF output for EAGLE 4.1 Export Wires with Arc, rotated Pads, Pad Shape Long & Offset rotated Packages in 0.1 degree export rectangle and circle on layer 1, 16, 21, 22 export polygon filling on klayer 1, 16 export text on layer 1,16,21,22 as wire (**vector font**), Export Layer 51/52 (Layer table expanded), Corrected LAYER_NAMES definition for BPLACE.
Uploaded by A. Zaffran (alf at |
44,912 |
5,142 |
2007-03-26 08:18:42 |
fanout.ulp |
fanout.ulp
This ULP will automatically generate net fanouts on a schematic from a TSV list of PIN/NET combinations. Every pin that matches in the list will have a NET extended from the pin to a PORT, and the port will have a LABEL added. The task is purely automated, saving time and preventing mistakes. This greatly simplifies the task of planning the nets for a project, especially if an FPGA, MCU or other high-pin count devices are used. The TSV file is easily created from Excel. Uploaded by Tennessee Carmel-Veilleux (veilleux at |
7,323 |
4,405 |
2007-08-20 16:38:34 |
fastgcode.zip |
The ULP *FastGcode* is a optimized and flexible G-code generator - toolpaths generated are 3 to 10 faster than similar programs.
In the zip you will find two versions that are optimized for Eagle 4.16 and 5.4 ( the only differences are the control positions in the dialog. Happy milling to all ! Livio Uploaded by Livio Cicala (livio at |
32,492 |
6,651 |
2009-03-12 17:43:30 |
fastplacer.ulp |
FastPlacer erleichtert das Platzieren der Bauteile, indem es erlaubt, bestimmte Netzklassen (z.B. GND und supplies) in den Airwires auszublenden.
Uploaded by Luc Eberhard (eol dot eberhard at |
10,589 |
7,879 |
2006-10-28 00:56:18 |
fill-via4vacuum.ulp |
Generate a mask to fill vias for vacuum adapter.
Uploaded by A. Zaffran (alf at |
3,371 |
5,742 |
2003-12-08 16:41:41 |
find-3.ulp |
Find a component by name or ref des, net, pad, pin, track, values, drills, etc. Works on schematics and boards.
Uploaded by Alan Stummer (astummer at |
12,805 |
5,783 |
2006-04-26 15:24:54 |
find-empty-polygons.ulp |
Find empty (invisible) polygons in packages.
Uploaded by CadSoft Support (support at |
1,678 |
4,432 |
2008-06-19 12:01:38 |
find-single-ended-wire.ulp |
Find single ended wire and vias.
Sucht nach offenen Leiterbahnenden und Vias. Uploaded by A. Zaffran (alf at |
16,158 |
5,316 |
2007-04-23 08:55:24 |
find.ulp |
Version 2.3. Find also PIN in Symbol and PAD/SMD in Package.
Uploaded by A. Zaffran (alf at |
42,830 |
4,614 |
2008-01-15 11:20:22 |
find2.1.ulp |
Diese ULP ist identisch mit find2. Mit dem Unterschied das Grid nicht mehr auf ämil“ und äfinest“ gesetzt wird, sondern auf ämm“ und ä0,635“.
Uploaded by Florian Immel (florian dot immel at |
13,013 |
4,703 |
2006-03-20 17:56:18 |
find_in-pins.ulp |
ERC-Ergänzung; prüft auf nicht eingefügte Input-Pins
search for all uninvoked gates with INPUT-Pins
Uploaded by Stefan Waldeck (stefan dot waldeck at |
1,540 |
5,623 |
2005-04-29 15:44:09 |
flexpick.ulp |
This ULP generates datas for a COSY
FLEXPICK for automatic mounting of parts.
Uploaded by Richard Hammerl (ric at |
440 |
5,037 |
1997-03-07 14:09:19 |
gcode-1.zip |
Generate g-code for mechanical processing of board.
only one file will be generated, with: mill, clean unused Cu from board, drill all holes, cut larger holes and finnaly cut board contour. Betwin phases, is implemented a simple tool change, for manually change bit. Tested with succes with KCam, but it should work with any other software. Uploaded by Silviu Epure (silviu dot epure at |
5,229 |
10,474 |
2007-09-25 09:11:20 |
gcode.zip |
Updated gcode creation files, allowing selections of more parameters at runtime.
These are modified from others files to produce gcode, tested using turbocnc.
Uploaded by Al Schemmer WB0YRQ (al at |
11,430 |
9,811 |
2003-10-07 02:16:24 |
gcode_02.zip |
This is the update of gcode-1, created by Silviu Epure. ULP generates G-Code for CNC milling machine. New features like as machine motion optimization, stop in case of diameter change, board contour tool size compensation and others are available.
Uploaded by Josef Plasil (jopl at |
6,006 |
2,594 |
2011-09-04 20:02:55 |
gen-stop-mask-via.zip |
Generate an individual Solder Stop Mask for Vias
Uploaded by A. Zaffran (alf at |
1,773 |
6,098 |
2005-12-08 10:02:44 |
gencad-2.ulp |
GENCAD V1.23 generates GENCAD placement data. Saves to dialog file name.
Uploaded by Jim Thurman (tlj at |
29,488 |
5,596 |
2006-09-11 18:04:26 |
gencad.ulp |
Generates a GenCad file (eg. used for Teradyne / GenRad In-Circuit-Testers) from the actual design.
Uploaded by Richard Hammerl (support at |
29,388 |
5,632 |
2005-02-28 13:50:33 |
gencad_130.ulp |
GENCAD V1.30 generates GENCAD placement data. Based on V1.27. Saves to dialog file name. Now rotations with all angles possible. Before only 90,180,270° were possible.
Uploaded by Peter Schulz (schulz at |
30,216 |
2,171 |
2011-03-23 10:22:24 |
gencad_131.ulp |
GENCAD V1.31generates GENCAD placement data. The specification states that string parameters should have double quotes escaped in the output file. This was added.
Uploaded by Aaron Hall (ash at |
31,561 |
1,098 |
2011-10-31 19:49:40 |
generate_3d_data.ulp |
V0.7 : Update zum Generieren der 3d-Daten zur Weiterverarbeitung in einem 3D-MCAD-System
Uploaded by Neubacher Andreas (a dot neubacher at |
32,712 |
9,219 |
2006-10-24 09:10:51 |
generate_3d_data.zip |
Exportiert 3D-Daten der Leiterplatte mit Bauteilen zur Weiterverarbeitung in einem MCAD-System (Ideas, SolidWorks, ...); ausgegebenes Dateiformat : IDF3.0 (IDB:board, IDL:libary)
Uploaded by Neubacher Andreas (a dot neubacher at |
175,695 |
8,180 |
2006-10-06 12:51:02 |
generate_3d_data_eng.pdf |
This is the help file of Generate 3D Data translated to English. Please e-mail me about any errors you find. There is no gurantee of accuracy or warranty either expressed or implied.
Uploaded by Chip (jpalombi at |
87,219 |
9,537 |
2007-03-11 22:47:40 |
generate_3d_data_v08.ulp |
Fixes to old ULP by Andy Neubacher. Let's you export your board as ECAD
files in .emn and .emp format for import into 3D CAD programs.
Uploaded by Morten Hjerde (morten at |
33,423 |
3,808 |
2011-05-31 09:58:50 |
genpkg_cae.ulp |
Generates packages for SMT aluminium electrolytic capacitors.
Uploaded by Weartronics (info at |
6,169 |
18,454 |
2006-02-15 00:39:53 |
genpkg_chp.ulp |
Generates packages for SMT chip resistors, capacitors and inductors.
Uploaded by Weartronics (info at |
4,680 |
5,577 |
2006-02-15 00:40:24 |
genpkg_mld.ulp |
Generates packages for SMT molded body inductors, capacitors and diodes.
Uploaded by Weartronics (info at |
6,188 |
5,390 |
2006-02-15 00:40:46 |
genpkg_qfp.ulp |
Generates packages for SMT quad flat pack ICs including QFP, SQFP, TQFP, TSQFP and others.
Uploaded by Weartronics (info at |
7,547 |
10,108 |
2006-02-15 00:41:17 |
genpkg_sod.ulp |
Generates packages for SMT small outline diodes including SOD and others.
Uploaded by Weartronics (info at |
5,303 |
5,513 |
2006-02-15 00:42:40 |
genpkg_soic.ulp |
Generates packages for SMT small outline ICs including SO, SOP, SSOP, TSOP, TSSOP and others.
Uploaded by Weartronics (info at |
6,292 |
13,542 |
2006-02-15 00:43:03 |
genpkg_sot.ulp |
Generates packages for SMT small outline transistors including SOT, SC and others.
Uploaded by Weartronics (info at |
7,182 |
5,788 |
2006-02-15 00:43:23 |
geometrical_shape.zip |
Draws geometrical shapes like hexagon, octagon and pentagon
Uploaded by Björn Schuster (schuster at |
5,390 |
3,661 |
2010-08-22 03:51:44 |
hide-airwires.ulp |
Hides airwires selected via the GROUP command during routing. Simply select the airwires to hide with the group command and run this ULP. Use 'RATS *' at the command prompt to show all airwires.
Uploaded by Bob Starr (rtzaudio at |
2,216 |
1,681 |
2011-05-20 01:25:56 |
hierarchical_v10.zip |
Some ULPs and scripts to do hierachical designs
Uploaded by Maurice SAAB (morisaab at |
9,137 |
2,099 |
2011-05-17 22:19:25 |
hpgl.ulp |
Generates a HPGL file for each schematic page
Uploaded by Peter Kuhlemann (peter dot kuhlemann at |
9,407 |
5,861 |
2004-02-16 18:01:57 |
hvpack10.zip |
HVPack V1.0 - A collection of new and modified ULP's
Eine Sammlung neuer und erweiteter ULP's
Contains: APRINT, BOM3, DRILLCFG, DRILLS, MAKEJUNC, PART2HTM, REPLACE, ROB, SNAP50, SNAPEW25 and UNROUTED. Uploaded by Helmut Vaupotitsch (hv at |
18,687 |
5,778 |
2000-04-28 13:06:26 |
hyperlynx-4_12.zip |
Exports the board to HyperLynx Signal-Integrity Transfer Format (.HYP)
W.curve correction in C.element.package.wires(W) for Eagle 4.1 Corrected PADSTACK counter in used PADSTACK Uploaded by A,. Zaffran (alf at |
13,537 |
5,561 |
2005-05-03 10:16:59 |
icxref095.zip |
icxref.ulp (v0.95) will create a set of html files which
will display a hyperlinked cross reference among all
the parts on a board. I wrote it to make it easier to
track down all the pin-to-pin connections on my board,
and to spot where connections were missing. It can take a
while to run because it keeps jumping out to the schematic
context to dig for information. I hope that others find
it useful as well. The zip file contains both Unix and PC
format versions.
This is version 0.95. The primary change here is the addition of a new signal overview page. This page contains record for each contact on every device your board, sorted into groups by connected signal and by entity/contact within these groups. Signal references in the device pages now are hyperlinked to the signal group on the signal map page. Uploaded by Bob Drzyzgula (bob at |
9,895 |
5,508 |
2000-11-07 20:55:44 |
import-bmp.zip |
Check for wrong Byte Address Range (if BitMaP saved with Coral Draw)
Uploaded by A. Zaffran (alf at |
20,304 |
7,225 |
2007-04-02 16:46:48 |
import-tango.ulp |
This ULP can be used to translate Tango Netlist to Eagle script. If you wish to use your OrCad schematic with Eagle Layout than just export your netlist into Tango format and translate with this ULP to Eagle Script. Eagle footprints can be already added into OrCad schematic.
Uploaded by Ralf Kilguss (ralf at |
10,562 |
6,828 |
2003-01-15 08:44:11 |
import-tango_for_lite.ulp |
This ULP can be used to convert a Tango format netlist for input to the Eagle Lite board layout tool. It is a modified version of Ralf Kilgass' ULP that runs into problems when used with Lite due to the board size limitation.
Uploaded by David A. Fishman (daf1424 at |
11,045 |
5,436 |
2005-03-01 19:39:21 |
import_dxf_polygons.zip |
This ULP imports, scales, mirrors and rotates
polylines and splines from a DXF file.
Use this ULP to import a vectorized logo, your
favorite font etc.
Arcs, circles, splines, curves are not supported yet.
Since this is a very simple, rudimentary script it just
generates straight lines to connect vertexes.
Use a vector graphics editor to prepare,edit/refine
the DXF file before importing it.
Uploaded by Tim Ruetz (tim at |
17,690 |
6,077 |
2008-08-14 22:49:15 |
import_dxf_polygons_03.zip |
This ULP imports, scales, mirrors and rotates
polylines and splines from a DXF file.
Improved Version of import_dxf_polygons.ulp
- insert point configurable
- default pen with=0
- supports smaller shapes than v0.1
Uploaded by Tim Ruetz (tim at |
17,894 |
8,448 |
2008-12-13 17:26:22 |
importbom_and_netlist.zip |
These are a couple of scripts I wrote to facilitate the importing of Orcad schematics into the layout editor. ImportNetlist.ulp imports a PADS2K netlist. ImportBOM (the most useful of both) imports a regular Orcad BOM file and lets you select the package for each group of items. The scripts are not well commented, maybe soon I'll work on that.
Uploaded by Jean Simonet (jean_simonet at |
4,208 |
10,208 |
2003-11-25 00:51:43 |
importexport.zip |
These ULPs can export a complete project as (special) script file, so that it can be imported in a different project again. Both schematics AND routed layout are exported/imported. Useful for channel duplication or creating a library of circuit snippets.
Uploaded by Andreas Weidner (andreas dot weidner at |
40,353 |
2,232 |
2011-07-26 10:46:33 |
importnetlist_pads.ulp |
This is a pads netlist importer. It is based on the prior postings of Jean Simonet and Ralf Kilguss (Tango importer). Be forewarned that the PADS netlist format may be older (not sure which version), but you should easily be able to modify the script for newer versions.
Uploaded by Keith Williams (espian at |
6,453 |
6,779 |
2008-04-25 23:25:21 |
inifile.zip |
This ULP is intented for other ULP developers and shall help them to preserve an ULP's settings between consecutive runs. This very easy to use approach should fit most of your needs.
Dieses ULP ist anderen ULP Entwicklern zugedacht und soll ihnen helfen, die Einstellungen eines ULPs zwischen aufeinanderfolgenden Läufen zu bewahren. Die Funktionaltät des ULPs ist sehr, sehr einfach zu benutzen und sollte den meisten Anforderungen genügen. Uploaded by Rene Koenig (rk at |
3,630 |
5,341 |
2006-08-14 14:24:20 |
inoplace.ulp |
This ULP generates datas for a Heeb Inotec InoPlacer for automatic mounting of parts
Uploaded by Bernd Krueger-Knauber (bkk at |
542 |
4,887 |
1999-11-18 08:32:59 |
invoke.ulp |
This is invoke.ulp with additional sheet info.
Dies ist invoke.ulp mit zusaetzlicher Sheet-Information. Uploaded by Rene Koenig (rk at |
3,044 |
4,680 |
2006-06-05 14:57:54 |
ipc-d-356.zip |
For EAGLE 4.1: This ULP generates IPC-D-356 data from your layout (a first attempt).
Uploaded by Richard Hammerl (ric at |
1,729 |
6,090 |
2006-05-12 09:52:29 |
isr.zip |
This ULP and associated symbols implement an inter-sheet reference scheme. Running the ULP on a schematic with the intersheet reference (ISR) symbols makes it easy to find where the signal goes on other sheets. This version includes support for using the ISRs on busses as well as nets. This version corrects file path problems.
Uploaded by Kevin Callan (kevin dot callan at |
1,987 |
5,596 |
2003-08-08 22:47:05 |
lbr-contents-dump.zip |
Dumps into a text file the list of the
symbols, packages and devices of the
currently open library and also all the
symbols, packages and devices themselves
into SCR files.
Uploaded by Francesco Montorsi (francesco dot montorsi at |
6,578 |
4,170 |
2010-04-05 00:27:36 |
lbr-merge.zip |
Uses dumps created by 'lbr-contents-
dump.ulp' to merge non-duplicated
entries of two libraries in a single
library.
This script is a polished version of Jim
Thurman's original 'merge_lbr.ulp'.
Uploaded by Francesco Montorsi (francesco dot montorsi at |
9,015 |
4,409 |
2010-04-05 00:40:48 |
lbr_man_1_3.ulp |
Library Manager: Move packages from source to destination lbr and generate variants for a number of devices. Requires version >= 4.0.
Uploaded by Richard Hammerl (ric at |
14,221 |
6,881 |
2005-02-17 14:11:56 |
lbr_merge_v5.7.2_2010.ulp |
This is an update of the old merge_lbr.
You can use this to sync/merge two
libraries into one.
Note: test this with a library copy when using for the first time. Does not work with path names with spaces...yet, bug eagle support and they can get the exit command fixed. Use in conjunction with the lbr_export_sch or lbr_export_brd ulp's and you can create a custom library that has everything you need. Uploaded by Joshua White (jwhite at |
47,752 |
4,112 |
2010-01-22 21:19:54 |
lbrwrconnect.ulp |
Writes all packages and connections of the current device displayed in the Library editor to a file (*.SCR). Restores all connections possible for a device in which the symbol is to be modified and therefore must be deleted from the device.
Uploaded by Jim Thurman (tlj at |
7,205 |
4,704 |
2006-08-18 00:45:02 |
libedit.ulp |
Library editor - Now with View!. This program will list all of the symbols and packages in a library when one is selected it will display the devices using that symbol or package. It will also list the devices in the library and upon selection display the symbols and packages being used by it. It will also rename of delete symbols, packages, and/or devices. It shows the number of devices using a symbol or package so unused symbols or packages can be quickly located.
Uploaded by Jim Thurman (jthurman at |
27,316 |
7,489 |
2007-04-18 19:28:21 |
libselexp.ulp |
Selected export of elements from a library
Uploaded by Jim Thurman (tlj at |
32,292 |
5,763 |
2006-06-09 21:26:33 |
lpkf_drl.ulp |
This ULP can be used for drilling with a LPKF milling machine.
Dieses ULP erzeugt Bohrdaten, die mit einer Fraesmaschine der Fa. LPKF verwendet werden koennen. Uploaded by Richard Hammerl (ric at |
3,025 |
5,280 |
1999-10-25 14:56:04 |
make-connector.ulp |
This ULP auto-generates symbols, packages and devices for simple SIP/DIP connector headers and receptacal types. It allows creation of a single part or multiple range of parts to allow quick creation of various connector template types.
Uploaded by Bob Starr (rtzaudio at |
29,185 |
3,846 |
2010-02-14 00:02:15 |
make-mask-in-lbr.zip |
Make user defined Stop- and Cream-Mask in Library
Uploaded by A. Zaffran (alf at |
3,290 |
5,469 |
2003-02-12 09:21:09 |
make-supply-symdev.zip |
Tired of not having the supply symbols you need handy? Now you can create named supply symbols instantly with image preview. Simply run this ULP in a library, select the style you want, enter the supply symbol name and click OK.
Uploaded by Bob Starr (rtzaudio at |
17,458 |
2,809 |
2011-02-17 15:03:09 |
make-symbol-device-package-bsdl.zip |
Generates Symbol, Package and Device from a text or BSDL file.
New symbol type Stripe for high number of pins. Uploaded by A. Zaffran (alf at |
35,461 |
5,494 |
2006-12-05 10:38:22 |
make-value-consistent.zip |
Make Schematic - > Board consistent.
Use the VALUE from Schematic.
Uploaded by A. Zaffran (alf at |
2,626 |
6,606 |
2005-08-29 11:11:32 |
make_bga.ulp |
A ULP to generate a BGA package given the number of rows, columns, pitch, and pad size.
Uploaded by Ed Anuff (ed at |
6,097 |
5,819 |
2004-06-02 23:29:37 |
make_drillfile.zip |
This ULP generates a drill tool table (*.drl) and a drill statistics (*.drs). The drill statistics is a table of drill diameters with the associated number of drills and the total number of drills.
Uploaded by Sven Petersen (s dot petersen at |
912 |
6,003 |
2003-11-03 16:58:17 |
make_symbol_ulp.zip |
A ULP for generating a symbol and device from a list of pin names such as might come from a part datasheet.
Uploaded by Ed Anuff (ed at |
12,424 |
9,838 |
2004-06-02 23:28:27 |
makelbrnodups.ulp |
This little ULP is a modified "MakeLBR.ULP", with instructions included
in the .ulp file itself. The improvement is that all library-pac,
library-sym, library-dev are checked for library name plus package,
symbol, and device name duplication and ignored if they have been edited
already. I don't know if this will work for all scenarios, however, I
used it on a large circuit board schematic with about 550 components,
and it generated the libraries for all parts. Uploaded by Frank Hoffman (frankh at |
13,801 |
4,966 |
1999-10-22 10:33:39 |
maskdata.ulp |
This ULP generates new layers for solder stop mask and cream frame. This allows to edit/delete certain symbols.
Mit diesem ULP kann man eigene Layer fuer die Loetstoppmaske bzw. Lotpastenmaske erzeugen. Diese Symbole koennen einzeln editiert werden. Uploaded by Richard Hammerl (ric at |
8,738 |
4,869 |
1999-11-23 14:21:02 |
matrix.ulp |
ULP for quick creation of LED matrixes
Uploaded by Stefan Fischer (info at |
9,850 |
4,251 |
2009-11-08 14:40:32 |
matrizdeleds.ulp |
Crea una Matriz de leds muy fácilmente...tan solo hay que indicarle el numero de filas y columnas...y la separación entre los leds. Board con GRID de 0.01 inch
Uploaded by Emerson Ospino Urbano (emerson52_00 at |
2,712 |
1,476 |
2011-07-05 23:34:28 |
measureslength.ulp |
This Ulp read all the wires placed in measures layer (47) and draw the length in the board of each wire. If modified some wire of measures layer run this ulp again.
Uploaded by Emerson Ospino Urbano (emerson52_00 at |
1,569 |
1,459 |
2011-09-08 21:17:28 |
merge_brd.zip |
Modified ULPs to aid merging two or more designs
Uploaded by David Moodie (dgmoodie at |
7,811 |
7,318 |
2002-11-01 13:57:17 |
merge_lbr.ulp |
Copy unique elements from one library into another.
Uploaded by Jim Thurman (tlj at |
43,724 |
6,698 |
2006-05-08 23:20:12 |
merging_v21.zip |
Minor bug fixed. Finally, an easy way to copy/paste between two instances of eagle (both schematic and board), also for backward compatibility.
Uploaded by Maurice SAAB (morisaab at |
11,091 |
5,689 |
2009-05-07 13:00:53 |
microstrip-radial-stub.zip |
Draw a Microstrip Radial Stub
Uploaded by A. Zaffran (alf at |
5,571 |
7,466 |
2005-10-20 14:39:14 |
mill-outlines.ulp |
Corrected Rank on auto generated Polygons.
Uploaded by A. Zaffran (alf at |
62,203 |
6,533 |
2006-07-27 14:17:31 |
mill2.ulp |
Corrected version of mill.ulp:
Generates milling shapes which can be edited and output with the CAM Processor.
Erzeugt Fraeskonturen, die man editieren und mit dem CAM-Prozessor ausgeben kann. Uploaded by Rudi Hofer (rudi at |
17,728 |
5,502 |
1998-12-15 16:52:52 |
mill3.ulp |
Alternative for mill2.ulp which leaves signal GND unmilled so that it flood-filles the pc board.
Alternative zu mill2.ulp, die das Signal
GND nicht "fraest" und deshalb die Platine mit diesem Signal "fuellt". Uploaded by Rudi Hofer (rudi at |
18,295 |
5,429 |
1998-12-15 16:52:52 |
mill_drill.ulp |
Output Milling Drills for CNC machines
to be used as an addition to
mill2.ulp and mill3.ulp
by Rudi Hofer, CadSoft Uploaded by Jörg Becker (jbecker at |
3,451 |
5,773 |
1998-12-10 15:39:47 |
mill_me.ulp |
use mill_me.ulp to mill holes of different diam's in your board with one milling tool only. Based on mill_drill.ulp Uploaded by stefan auchter (stef at |
3,441 |
5,062 |
2001-01-08 12:54:12 |
mill_me4-2.ulp |
mill_me4 with package holes included
Uploaded by Stefan Auchter (stef at |
3,827 |
5,239 |
2001-06-06 10:11:28 |
mill_me4.ulp |
mill_me updated to eagle 4. Produces a script to mill holes of different diameters with only one milling tool.
Refer to the description in the file header. Uploaded by Stefan Auchter (stef at |
3,411 |
4,986 |
2001-04-18 16:28:24 |
millsw01.ulp |
Fräsen von LPs basierend auf mil3.ulp mit folgenden Erweiterungen:
- Draehtenden entsprechend Eagle
- Mehr Pad und Via-Formen
- Unterdruecken von kurzen Drahtstuecken damit der Fräserkopf nicht unnoetig auf/abgesenkt wird. Uploaded by Werner Schattmann (schattmann at |
27,762 |
4,957 |
1999-01-26 23:37:49 |
millsw02.ulp |
Erstellen von Fräskonturen für CNC-Maschinen. Update von millsw01.ulp auf Eagle V4.01 Uploaded by Werner Schattmann (schattmann at |
27,904 |
5,582 |
2001-02-23 00:36:32 |
mirror-board.ulp |
Mirror the board (to edit Bottom-Layer from Top-View). Spiegeln des ganzen Boards (um die Unterseite von oben zu layouten).
Corrected DISPLAY comand / Berichtiger DISPLAY Befehl
Uploaded by A. Zaffran (alf at |
4,983 |
5,848 |
2006-09-15 11:49:17 |
mount-marks.ulp |
This ULP generates data for mounting machines, incl. passer mark.
Please read description in ULP.
Uploaded by A. Zaffran (alf at |
2,071 |
4,610 |
2007-11-26 14:45:53 |
mount-trace.ulp |
Shows all parts on the top layer with the same values of a board for manual assembling.
Zeigt alle Bauteile auf der Top-Seite mit gleichem Value für manuelles Bestücken. Erweitert für die Anzeige aller gleicher VALUE im Board. Uploaded by A. Zaffran (alf at |
7,716 |
5,403 |
2006-04-27 16:44:50 |
mount.ulp |
This ULP generates a file that can be
used with mounting machines.
Uploaded by Richard Hammerl (ric at |
1,004 |
5,134 |
1997-03-07 14:20:08 |
mountsmd.ulp |
This ULP generates a file that contains information of all SMD's in the layout. Can be used with mounting machines.
Updated version that distinguishes Top and Bottom layer. Uploaded by Richard Hammerl (ric at |
2,007 |
5,365 |
2000-02-01 13:07:48 |
mountsmd_thr.ulp |
Improved version of "mountsmd.ulp". It comes with a comfortable GUI, lets you select the layer(s), the unit(mm/inch), the delimiter (space/tab), and asks before overwriting of an existing file.
Uploaded by Thomas Riedger (thomas dot riedger at |
5,110 |
3,230 |
2010-09-10 09:44:42 |
move-board-group.ulp |
Generate a script of GROUP selected parts and write the locations to a script. This may be used to move parts in one or more board files or restore a placement of parts later.
Uploaded by Bob Starr (rtzaudio at |
3,478 |
2,159 |
2011-01-30 18:51:35 |
mycream.ulp |
This EAGLE User Language Program generates new layers for cream frame.
This can be edited seperately.
Das ULP erzeugt neue Layer fuer die Loetstopsymbole. Diese können seperat geändert werden.
Uploaded by Holger Buss (buss at |
2,572 |
4,694 |
2002-07-17 23:39:14 |
mystop4.ulp |
This EAGLE User Language Program generates new layers for solder stop mask. This can be edited sepetately.
Vias can be left out of solder stop.
Das ULP erzeugt neue Layer fuer die Loetstopsymbole. Diese kann seperat geändert werden. Vias können ausgespart werden.
Uploaded by Holger Buss (buss (at) mikrocontroller dot com) from Entwicklung |
8,338 |
5,651 |
2005-11-24 16:07:58 |
namesfrom1.ulp |
Renumbers parts on a board. Each part type will start with a numerical extension of "1". Useful after deleting parts, to close "numerical holes". Uploaded by Frank Hübenthal (frankhuebenthal at |
2,078 |
5,311 |
1998-07-16 15:13:12 |
netcount.ulp |
An ULP who counts the nets and show how
many signals are on the net. A warning is generated if only one signal is present. Uploaded by Bernd Krueger-Knauber (bkk at |
1,397 |
5,319 |
1998-02-11 12:17:13 |
netlinks_v1.zip |
Markierung von Netzenden mit I,O und IO - Verweis auf gleiche Netz- und Busnamen durch Angabe der Schaltplanseite.
Uploaded by Andreas Funcke (andreas dot funcke at |
6,479 |
5,260 |
2002-09-22 07:40:14 |
netlinks_v15.zip |
Markierung von Netzenden mit I,O und IO - Verweis auf gleiche Netz- und Busnamen durch Angabe der Schaltplanseite.
V1.5 mit neuen Features und Bug-Bereinigung.
Uploaded by Andreas Funcke (andreas dot funcke at |
8,161 |
5,231 |
2002-10-15 08:24:05 |
netlinks_v16.zip |
Markierung von Netzenden mit I,O und IO - Verweis auf gleiche Netz- und Busnamen durch Angabe der Schaltplanseite. V1.6 mit Bug-Bereinigung für V4.09r56.
Uploaded by Andreas Funcke (netlinks at |
8,197 |
6,146 |
2003-08-12 09:41:17 |
netlist_protel.ulp |
Generates a netlist in Protel Standard format (similar to Tango)
Uploaded by Hans Lederer (hans dot lederer at |
2,053 |
10,182 |
2001-09-19 22:28:20 |
newgeom.ulp |
This ULP converts pad shape, pad diameter, drill size for an opened Library. I prefer to use SQUARE pad for Pin 1 and ROUND for remaining. I also have a preferred diameter and drill. This ULP is easily modified to match user needs. Uploaded by Mike Davis (ipscone at |
1,615 |
5,018 |
1998-08-21 20:50:00 |
normalize-rcl-values4.ulp |
Normalize All Schematic R/C/L Part Values - v1.04 (5/18/09) This ULP generates a script to normalize all resistor and cap part values. Resistors are normalized in '1K00' or '1.00K' type format. Resistor values in the form of 100 or 1.10 are normalized to 100R or 1.10R format. Capacitors are normalized in '1N1' or '1.1N' type format. Likewise, any cap unit suffixs are normalized to 'uF', 'pF' or 'nF' format. Inductors may also be normalized in 'nH', 'uH' or 'mH' format.
Uploaded by Bob Starr (robertstarr at |
24,355 |
3,824 |
2009-06-20 18:17:46 |
normalize-text.ulp |
normalize-text.ulp
GUI for the Layout (PCB) program that automates the task of normalizing ALL labels (Names/Values/Text) to a standard size/thickness that might be required by your manufacturing process. Automatically SMASHes all the parts, CHANGEs the SIZE and RATIO to the specified values. Thickness is entered as a measure and RATIO is calculated from size and thickness. Production-tested script, inches and mm supported. Uploaded by Tennessee Carmel-Veilleux (veilleux at |
7,864 |
5,356 |
2007-08-20 16:48:43 |
num4val.ulp |
This EAGLE User Language Program generates a Script
file that can be used to renumber the parts of a
board (then schematic) in respect of the values found.
ie : R1,R2,..., Rn : same value Uploaded by Laurent AUTHIER TABANON (lauthier at |
4,620 |
5,132 |
2001-05-14 11:55:38 |
orcad_netlist.ulp |
Takes a board file and exports an OrCad Layout ASCII file. The ULP exports the compnents and netlist, along with X&Y and rotation. With a properly matched library between Orcad and Eagle (footprint names and datum point) a decent OrCad layout can be achieved. Even the parts are placed exactly the same! Only the nets would have to be routed.
Uploaded by Claudio Irrgang (layout at |
4,252 |
7,791 |
2004-03-10 06:26:55 |
pad-circlesv1-1.zip |
Create circular/arc arrays of pads (SMT and PTH) and circle shapes in the Package Editor.
Selectable pad type, size and shape, pad numbering and direction, pad and array rotation, and circle sizes.
User guide included. Updated version (v1.1). Bug fixes and layout optimised for v5. (Still usable with v4).
Uploaded by Warren Brayshaw (warrenbrayshaw at |
421,678 |
2,137 |
2011-03-05 03:18:53 |
paldrill.ulp |
This ULP generates out of the board window a PRO-PAL format used for drilling with ISEL machines. Look at the head of the program to make your settings. Uploaded by Reinhard Daemon (yum at |
12,140 |
4,700 |
1999-03-30 11:14:06 |
panelize.ulp |
This ULP offers a way to get an array of several boards with identical silk screen. Please read the hints in the file.
Das ULP erlaubt eine Nutzenerstellung bei dem der Bestueckungsdruck auf den einzelnen Platinen gleich bleibt. Bitte lesen Sie die Hinweise in der Datei. Uploaded by Richard Hammerl (ric at |
2,368 |
5,491 |
1998-06-17 13:47:43 |
panelize.zip |
This ULP offers a way to get an array of several boards with identical silk screen. Please read the hints in the file. This Version support Spin-Flag, require version >= 4.11.
Das ULP erlaubt eine Nutzenerstellung bei dem der Bestueckungsdruck auf den einzelnen Platinen gleich bleibt. Bitte lesen Sie die Hinweise in der Datei. Diese Version unterstützt das Spin-Flag und setzt eine Version >= 4.11 voraus. Uploaded by A. Zaffran (alf at |
1,625 |
7,163 |
2004-12-10 08:29:02 |
par2rtf_ms.ulp |
Gibt die Partlist und Bill of Materials als Tabellen im RTF-Format aus, sowie 2 unterschiedliche Header für jede Tabelle.
Ist unter MS-Office 7.0 und 2000 getestet.
Uploaded by Bronner Thomas (info at |
18,728 |
5,495 |
2003-01-27 15:26:36 |
par2rtf_so.ulp |
Gibt die Partlist und Bill of Materials als RTF-Datei in Tabellenform aus.
Getestet unter Staroffice 6.0
Uploaded by Bronner Thomas (info at |
7,008 |
4,904 |
2003-01-27 15:28:37 |
part.ulp |
Bauteileliste nach Baut.typen sortiert Uploaded by Ivor Krause (ikrause at |
5,027 |
5,380 |
1999-01-22 10:57:43 |
part2htm.ulp |
This ULP generates a Parts Listing of a board file and outputs it to a HTML file for publishing on a company intranet. Uploaded by Sean D. Alcorn (sdalcorn at |
2,526 |
5,255 |
1997-10-13 16:12:40 |
parts-coords-mils.ulp |
Modification of Walter M's program. Outputs PCB component locations in mils instead on mm.
Uploaded by Jeff Long (jlong at |
6,132 |
11,542 |
2006-04-12 21:13:47 |
parts-coords.ulp |
This ULP lists all devices, packages and libraries separately for board and schematic. It includes also the location in Schematic (coordinates and sheet of each gate)and Layout (coordinates and layer). The output file is tabulator separated and can be imported into spreadsheet software.
Uploaded by Richard Hammerl (support at |
5,821 |
5,527 |
2005-10-10 14:17:54 |
parts-coords1_3.ulp |
Updated to support every possible grid-unit you like to use (mic, mm, mil, inch).
Uploaded by Rene Koenig (rk at |
8,289 |
5,388 |
2006-04-24 12:17:38 |
parts.ulp |
This EAGLE User Language Program shows all devices, packages and libraries separately for board and schematic and allows to write a file for copying to Excel.
Uploaded by Walter Mücke (hochberg3 at |
5,088 |
5,979 |
2003-04-16 20:31:45 |
parts2_csv_tex.ulp |
This ULP generates either a .csv table (Microsoft-Excel or OpenOffice-Calc) or a .tex table (LaTeX, as "Longtable") for documentation purpose. You can select if your table should contain a consecutive number, name, value, package and/or library. This ULP can be started either from a schematic or from the board as long as the appropriate files exist.
Uploaded by Matthias Meeh (matthias dot meeh at |
7,400 |
4,484 |
2009-08-26 18:54:20 |
parts_on_sheets.ulp |
Run this ULP on a schematic. It makes a simple text file in the project directory that cross references all parts to the sheet they are on.
Uploaded by Kevin Callan (kevin dot callan at |
1,011 |
5,215 |
2005-05-13 20:58:46 |
parts_tk.ulp |
This EAGLE User Language Program prints a board's Partlist including the position and orientation of each part, separated by a semicolon. So you can read the part-file with any spreadsheet- program such as EXCEL, Microsoft WORKS ...
Uploaded by Wolfgang Barthel (w dot barthel at |
1,327 |
5,505 |
1997-03-25 19:44:34 |
pathalign.ulp |
Dieses ULP dient dazu im Layout-Editor Bauelemente entlang eines Kurvenzuges anzuordnen.
Sehr nuetzlich zB fuer aus LEDs bestehenden Quasi-Analog Anzeigen.
Uploaded by Johannes Frank (joe at |
15,316 |
5,566 |
2004-05-09 23:49:14 |
pattern.zip |
Generates packages for SMT.
(CAE, CHP, MLD, QFP, SOD, SOIC, SOT)
Uploaded by Thorsten Mühlke (thorsten at |
223,518 |
5,530 |
2006-08-26 05:44:10 |
pcb-gcode-3.3.2.zip |
Now much easier to use! Pcb-gcode creates g-code
files to allow you to produce a printed circuit board
using a CNC router or milling machine. Supports
outlining tracks (mech. etching), drilling and
milling. Removes slivers by offsetting outline
passes. Includes a setup screen that eliminates
editing config files. Advanced functionality
available. Please see http://groups.yahoo.com/
group/pcb-gcode for info, support, and updates.
This program is free, see readme.html.
Uploaded by John Johnson (johnatl at |
152,137 |
34,124 |
2006-01-19 17:05:40 |
pcb-gcode-wizard-v100.zip |
This is the demo version of PCB-Gcode-Wizard which is a graphical Gcode viewer, plotter, and G00 rapids optimizer for PCB milling files generated with pcb-gcode.ulp from John Johnson. The central feature of this program allows you to delete redundant outlines when using copper pour, so that you only have ONE isolation milling pass (saves lots of milling time!). See more info, screenshots, and purchase full version at PCBGCODE.COM.
Uploaded by Paul K in Texas USA (pcbgcodeinfo at |
1,526,412 |
4,090 |
2010-12-17 04:53:07 |
pcb-service.ulp |
PCB Quote Service.
This ULP extends pcb-service.ulp
(introduced in 5.11) to the PCB manufacturer EuroCircuits for European Eagle users.
Uploaded by CadSoft Support (support at |
19,268 |
1,763 |
2011-10-28 12:47:51 |
pcb_profiler.zip |
Abgeänderte Version von pcb_gcode.ulp für den ColinBus Profiler.
Zum Erzeugen von Isolationsfräsen und bohren von Leiterplatten.
Uploaded by Gerd Vogel (gerd_vogel at |
561,418 |
5,494 |
2007-07-09 14:01:58 |
pcb_profiler_v2.0.zip |
Neuere Version (2.0) des Programmes pcb profiler. Mit dem aus Eagle Board Daten für den ColiBus Profiler erstellt werden können.
Uploaded by Gerd Vogel (gerd_vogel at |
1,152,779 |
5,308 |
2007-09-26 09:45:12 |
pic.ulp |
This ULP converts a schematic or a board into input for GNU PIC. PIC is a picture description language used by Troff and LaTeX for very high quality typesetting of documents, reports, manuals, datasheets, etc. Adapted from the dxf writer ulp.
Uploaded by D. Jeff Dionne (jeff at |
8,788 |
6,796 |
2002-08-27 07:30:24 |
place50.zip |
Simple Autoplacer, run this ulp in the schematic; and exec the resulting script in the new created PCB - it will place all parts of the board to the position in the schematic. Most useful for analog designs.
Uploaded by Matthias Weingart (eagle at |
924 |
15,715 |
2000-02-20 12:05:00 |
place_layer_cycle.ulp |
Keybinder: Toggle Silkscreen.
When you're routing, you can switch the silkscreen on/off. (handy!)
You can map F2 to the command: ASSIGN F2 run 'Place_Layer_Cycle.ulp' Uploaded by Frank Boon (fboon at |
878 |
6,681 |
2005-11-20 14:52:17 |
position.ulp |
This program outputs a file <filename.csv> with part, position, and orientation data in a comma-delimited format suitable for import into a spreadsheet or database. This version is targetted toward board shops requiring inch-based data. It has been tested with Eagle 4.1x versions. It is based on 4quad.ulp by Sven Petersen.
Uploaded by Diehl "Marty" Martin (dhmartin at |
2,331 |
5,498 |
2006-02-28 16:57:25 |
print-inductor.zip |
Generate long spirals for print inductor.
Uploaded by A. Zaffran (alf at |
13,568 |
6,756 |
2005-01-25 16:31:37 |
print.ulp |
Layer-umschalt-und Druck ULP
praktisch, um zwischen versch. Sets von Layern für die BRD-Bearbeitung und zum Drucken zu wechseln. Für SCHs läßt sich der Zoom-Faktor wählen
Uploaded by Tomsa Herrmann (101 dot 150306 at |
3,478 |
5,161 |
2001-04-06 15:02:44 |
protel2eagle.zip |
This ULP will convert a netlist in Protel .NET format to an Eagle script and PCB layout.
Uploaded by Tom Connelly (tconnelly at |
56,468 |
8,142 |
2002-12-12 09:58:28 |
psrotate.ulp |
Version 1.10, rotiert nun auch RECTANGLES, SMDs, TEXTE und PINS.
Mehr auf http://home.t-online.de/home/Hj.Saemann-BL Uploaded by Hansjörg Sämann (hj dot saemann-bl at |
15,417 |
4,547 |
1998-10-07 13:52:53 |
psscale.ulp |
Scales up or down a part or a symbol in a library. More on <http://home.t-online.de/home/Hj.Saemann-BL> Uploaded by Hansjörg Sämann (hj dot saemann-bl at |
12,979 |
4,819 |
1999-09-12 13:33:40 |
psscale2.zip |
Revised and improved version of PSSCALE.ULP. See PSSCALE.TXT
included in zip file
Uploaded by christopher buckley (cpmb at |
5,865 |
10,061 |
2001-12-23 05:14:29 |
psscale3.zip |
Whoops! Please disregard previous submission of PSSCALE.ZIP Version 1.01. Use following version 1.02
Uploaded by Christopher Buckley (cpmb at |
5,967 |
9,228 |
2002-01-02 01:42:51 |
qfind_1.ulp |
Easy quick doubleclick finder, parts, nets, signals
Uploaded by Lukas Klimek (klima dot luk at |
8,450 |
3,856 |
2009-08-08 15:56:35 |
qfp.zip |
Creates a qfp SMD mount package/symbol/device using dimensions from datasheet, pin names (and types).
Numbers can be taken directly from the datasheet without having to calculate pin sizes.
Uploaded by James Davis (davija at |
11,763 |
6,725 |
2004-06-08 01:23:36 |
renamelibrary_1_0_0.ulp |
Benennt die Library Namen von Bauteilen im Schaltplan (Bauteil für Bauteil) um. Der umzubenennende Libraryname und die neue zu verwendende Library können aus Listen ausgesucht werden.
Uploaded by Dipl.-Ing. Klaus Schreier (klaus at |
3,209 |
3,873 |
2009-01-09 22:36:23 |
renamsig_4.ulp |
updated version to replace renamsig.ulp included with merge_brd files. Now selects only routing layers before re-naming signals.
Uploaded by David Moodie (dgmoodie at |
2,480 |
4,741 |
2002-11-11 13:29:24 |
renum130.ulp |
Two new features added to renum120.ulp
Now allows renumbering starting from any corner (independantly top and bottom). You can also specify a new suffix to start with on solder side.
This ULP will generate the script file to renumber as well as a preview file. Uploaded by Michel Dagenais (jcmae at |
15,313 |
5,311 |
1998-10-07 23:13:36 |
renumber-sch-group.ulp |
A modified renumber-sch.ulp that allows you to optionally specify the starting number, skip numbers ending in particular digits and/or renumber only those parts within a rectangle you draw on a separate layer (as a sort of primitive group function).
Uploaded by Neil Allison (avon dot tech dot solutions at |
16,188 |
4,866 |
2002-08-18 11:42:27 |
renumber-sch-group_v2.ulp |
Renumber the parts of a schematic, optionally specifying start number, skipping digits and/or only those parts within a user specified rectangular area. The original did not work with user areas and multiple sheets. This one does. Comments welcome.
Uploaded by Neil Allison (neil at |
16,655 |
5,972 |
2004-04-17 10:31:42 |
renumber-sch_4_4_0.ulp |
Erweitert renumber-sch.ulp so, dass Bauteile pro Seite nummerriert werden (2 Stellen Seite, weitere 2 Stellen sind die Nummer auf der Seite). Weiters kann für eine neue Revision die bestehende Nummerierung beibehalten werden (in diesem Fall werden nur Bauteile beginnend mit 00 nummeriert).
Uploaded by Dipl.-Ing. Klaus Schreier (klaus at |
13,394 |
4,458 |
2008-11-29 02:03:28 |
renumber-sheet.ulp |
Corrected numbering if use numerical order by sheet with same prefix.
Uploaded by A. Zaffran (alf at |
14,366 |
6,767 |
2006-08-23 10:05:24 |
renumsch-at-starting-num.ulp |
renumber a schematic, starting at number of your choice----this replaces the previous one of the same name which had a bug. (it would start at "101" if you entered "100") It still won't renumber a part with a trailing letter like "C5A".
Uploaded by Douglas Hartell (theatrnx at |
9,552 |
5,391 |
2003-03-21 23:21:35 |
resistor_value_list.ulp |
This ULP when run displays a list of all (960) 1% value resistors. You may cut and paste a value from the list. I find it convienent to assign this ULP to CNTR,ALT,"R".
Uploaded by Doug Lewis (doug dot lewis at |
2,387 |
3,898 |
2009-04-30 19:27:02 |
restrict-4.03.ulp |
A modified version of restrict.ulp. This restrict.ulp accurately restrict pads according to pad type. Purpose of this script is to restrict top component pads to be included in the double sided Autorouting.
Uploaded by Gary Cho (ngaihua at |
3,854 |
4,634 |
2001-11-06 03:38:52 |
restrict-4.04.ulp |
A modified version of restrict-4.03.ulp. This restrict.ulp will work under version 4.1 and accurately restrict pads according to pad type. Purpose of this script is to restrict top component pads to be included in the double sided Autorouting.
Uploaded by Atif Ahsan (atif dot ahsan at |
4,226 |
4,623 |
2006-10-24 18:46:39 |
restrict.ulp |
This ULP puts RECTs on the 'tRestrict' layer around all the pads. You may want this if you want to make a double-sided board, but only want to solder on the bottom layer.
This ULP is only a slight adaptation from the obsolete '0V_restr.ulp'. It now runs in Eagle 4.01 and includes all connected pads. Uploaded by Marc Hoppenbrouwers (marckyh at |
2,745 |
4,672 |
2001-03-09 02:11:30 |
ripup-polygon.ulp |
Ripup only polygons by signal name in visible layer
Ripup nur von Polygonen des Signalnamen in sichtbaren Layern Uploaded by A. Zaffran (alf at |
3,762 |
4,898 |
2007-03-09 09:18:42 |
rotate-dev-pac_in_lbr.zip |
Rotate a package in Library and generate package veriants.
Dreht ein Package in der Bibliothek und erzeugt Packagevarianten im Device.
Uploaded by A. Zaffran (alf at |
7,475 |
5,933 |
2002-02-20 09:20:20 |
rotate.ulp |
A Rotate utility that isn't perfect yet... Uploaded by Xapns Tsiris (xapnsgr at |
2,892 |
4,652 |
2000-05-12 19:04:54 |
rotatev1.ulp |
This ULP is a new version of rotation.ulp.
(same function) Additional the STEP-command
generate a array from the component. Uploaded by Julia Rechenbach (julia dot rechenbach at |
16,947 |
4,624 |
1998-06-13 09:03:08 |
rotatev4_0.zip |
Generate a library with rotated packages from a board, Version EAGLE 4. (Based on the rotatev1.ulp for EAGLE 3.5 from Julia Reichenbach)
Uploaded by A. Zaffran (alf at |
5,765 |
5,411 |
2001-07-09 11:45:33 |
round_drills_mm_all_.zip |
Round drills/holes to 0.1mm multiple in a library. Or in all libraries in a directory.
Also a check drill (diameter) on the board. Uploaded by Rindert Nauta (r dot nauta at |
3,852 |
6,360 |
2006-02-19 07:56:17 |
routenet.ulp |
This ULP automatically routes all airwires of the given net creating straight connections between pads.
Since Eagle does not (yet) snap to pads this can be useful when routing off-grid components.
Uploaded by Johannes Frank (joe at |
2,893 |
5,581 |
2005-11-02 14:13:05 |
run-loop-all-devicesets-script.ulp |
Start a script in all devisesets in a LBR
Uploaded by A. Zaffran (alf at |
670 |
3,719 |
2008-05-28 15:56:10 |
sch2cgm.ulp |
Schaltplanseite in .CGM-Datei (Computer Graphics Metafile) ausgeben Für bequemen Import in Textverarbeitungen sowie ideal für PDFs: Texte bleiben durchsuchbar, Output-Datei sehr klein
Uploaded by Henrik Haftmann (haftmann at |
15,294 |
5,086 |
2005-10-07 09:36:15 |
sch2wmf.zip |
Schaltplanseite (oder Board) in .WMF-Datei (Windows Metafile) ausgeben. Für bequemen Import in Textverarbeitungen sowie IE6+: Texte bleiben durchsuchbar, Output-Datei sehr klein
Uploaded by Henrik Haftmann (henrik dot haftmann at |
25,802 |
4,407 |
2008-10-14 13:33:23 |
select.ulp |
Selects components or nets listed at the command line
and filter/subtract/add or make new group
Uploaded by Danny Damhave (dd at |
7,724 |
3,208 |
2010-03-03 21:17:24 |
sheet-numbers.ulp |
Automatically place sheet numbers to show net connections between sheets of a schematic.
Uploaded by Robert A. Rioja (robert at |
15,219 |
5,613 |
2006-01-11 17:36:54 |
show-netclass-by-layer.ulp |
This ULP runs in a schematic and defines the layers 190 Class0, 191 Class1, ... 197 Class7. It then
draws (or traces) wires on the layer corresponding to the class of every net.
Uploaded by Neil Allison (neil at |
3,105 |
4,662 |
2004-02-18 10:07:51 |
show_all_packages.ulp |
Placed all packages of a library on a board. Work with big library
Uploaded by Jesus Fernandez Hernandez (jfh dot 69 at |
3,068 |
4,973 |
2008-03-28 17:11:13 |
showall.ulp |
SHOWALL.ULP operates the INFO command on every part of your design. This allows you to verify the correct location of smashed parts NAMES an VALUES. Uploaded by Werner Marschik (marschik at |
1,523 |
4,785 |
1998-08-26 09:29:37 |
showclass.zip |
This ULP repairs the non-working showclass.ulp coming with EAGLE V5.
Dieses ULP repariert das nicht funktionierende showclass.ulp, das der Version 5 beiliegt. Uploaded by Rene Koenig (rk at |
4,434 |
4,556 |
2008-05-06 14:07:15 |
showgroup_v1.0.ulp |
Highlight selected components in schematics when working in board or visa versa.
Select a group of components in board and then RUN ShowGroup.ulp The selected componets are showed in the schematics surounded by a square. It also works the oposit way selecting components in the schematics to locate the on the board. Uploaded by Øyvind Eggen (oyvind dot eggen at |
3,474 |
3,928 |
2009-08-28 11:33:43 |
showlbr.ulp |
This ULP can be used for library documentation. All devices will be placed in a schematic automatically. Uploaded by Richard Hammerl (ric at |
2,811 |
5,190 |
1998-02-11 11:48:14 |
showlbr_brd.ulp |
Works like ShowLBR, but put all packages of a library on a board. Uploaded by Thomas Mohaupt (thomo at |
1,798 |
5,000 |
1998-09-11 13:59:46 |
showvals.zip |
Highlights parts with a given value (board or schematic).
Hebt Parts mit einem gegebenen Value hervor (Board oder Schematic). Uploaded by René König (rk at |
3,412 |
5,759 |
2005-04-19 11:56:57 |
showzoom.ulp |
Das ULP findet Bauteile in BRD und SCH. Das Bauteil wird passend gezoomt. Im SCH funktioniert die Suche auch über mehrere Seiten.
Uploaded by Steven Pohl (webmaster at |
3,068 |
4,964 |
2003-08-24 10:35:42 |
silk-new.ulp |
This is a new version of silk4.ulp for EAGLE version 4.0. It fixed some bugs and adds assorted options.
Uploaded by Bill Westfielf (westfw at |
14,472 |
4,777 |
2002-11-30 10:13:28 |
silk.ulp |
Some board houses want to have at least 8 mil width for silk screen lines in order to get legible results. This ULP creates new silk screen layers from your layout and changes silk screen line width to 8 mil.
For EAGLE version 3.5.
Uploaded by Richard Hammerl (ric at |
5,140 |
4,581 |
1998-05-26 14:44:13 |
silk2.ulp |
Similar to silk.ulp, but updated for EAGLE 4.11 and with enhanced functionality.
Uploaded by Robert K NIchols (rnichols at |
12,229 |
5,525 |
2003-08-27 22:53:49 |
silk_gen.ulp |
Generates new top and bottom silk screen layers using lines that are
within user-defined width limits. Useful for submitting boards to
manufacturers with minimum silk screen line width limits. New features
include: one click removal of generated silk screen layers; limit the
maximum line width as well as the minimum; select the source layers
from a list; convert filled rectangles and circles to outlines and
solid filled polygons to hatch filled. For Eagle 4.1.
Uploaded by Alex Holden (alex at |
18,567 |
6,766 |
2006-03-22 09:59:52 |
sm_all.ulp |
This ULP smashes all elements in the layout. Uploaded by Reinhard Daemon (yum at |
1,772 |
4,879 |
1999-03-29 15:04:50 |
smash_all.ulp |
SMASH ALL for EAGLE 4. This ULP will "SMASH" all parts on board or Schematic. Uploaded by Sergey Molchanov (serge at |
1,538 |
5,652 |
2001-05-30 00:33:55 |
snap-pin-in-smbol.ulp |
Snap (move) PINs in Symbol to Grid (Default)
Uploaded by A. Zaffran (alf at |
1,262 |
4,892 |
2003-02-05 09:41:18 |
snap_sch.zip |
ULP to help snapping schematic elements back to the grid Uploaded by Andreas Schulz (accot dot schulz at |
3,891 |
5,531 |
2000-01-28 23:50:38 |
snaplpin.zip |
Snap Symbol-Pins in Library at default Grid Uploaded by A. Zaffran (alf at |
890 |
5,359 |
2000-02-01 13:31:39 |
snappads.ulp |
This ULP moves the pads and smds of a package (in the library editor) to a user-defined mil or mm grid. Uploaded by Rudi Hofer (rudi at |
1,715 |
5,652 |
1998-06-15 12:29:29 |
snapsch2.ulp |
Version 2 from SNAPSCH.ULP. This EAGLE User Language Program produces a script file that can be used to snap the symbols of the current shematic to default grid (0.1 Inch). Please read the header from the ULP.
Version 2 von SNAPSCH.ULP. Dieses EAGLE ULP generiert ein Script um die Symbole im aktuellen Schaltplan auf das Default-Grid zu setzen. Lesen Sie unbeding die Erklaerung im Vorspann des ULP. Uploaded by A. Zaffran (alf at |
8,726 |
4,906 |
1999-12-21 08:49:46 |
spice.zip |
ULP for generating a SPICE netlist
(any comment is welcome) Uploaded by Rudi Hofer (rudi at |
20,966 |
6,495 |
1998-04-22 13:35:08 |
spiral-coil.zip |
Spiral-Spulen-Generator für mehr Info drücken Sie den Help-Button.
This ULP generate a print coil, press Help on menue for more info.
Uploaded by A. Zaffran (alf at |
5,923 |
7,628 |
2005-01-25 12:00:31 |
split-device-symbol.ulp |
This ULP generates the CONNECT list for a new Device, that consists of several Symbols (Gates), which have been extracted from one big Symbol by GROUP; CUT; and PASTE.
Uploaded by A. Zaffran (alf at |
7,353 |
4,374 |
2006-12-05 10:44:10 |
statistic-brd.ulp |
Board Statistic, corrected Class handling.
Uploaded by A. Zaffran (alf at |
81,115 |
4,664 |
2007-12-04 10:24:48 |
statistic-copper-plane.zip |
Statisic of copper (Board plane)
Uploaded by A. Zaffran (alf at |
5,204 |
10,624 |
2004-06-25 13:19:28 |
statistic-sch.ulp |
Schematic statistic
Uploaded by A. Zaffran (alf at |
20,625 |
4,383 |
2007-07-02 17:06:18 |
stkdoc.ulp |
V1.0 of an ULP which copies all parts with prefix X to new layers and docments their pins with their connected signal names. Uploaded by Martin Bammer (e9525103 at |
5,440 |
4,498 |
2000-09-12 20:54:48 |
super_bom.ulp |
Bill of Materials program V2.1. Uses external parts Database and creates external link list to match Database entries to schematic parts to generate combined list. Problems corrected with dollar signs in cost, total computation, blank fields in database.
Uploaded by Jim Thurman <jthurman at onbalance.com> from NeuroCom Intl
Uploaded by Jim Thurman (jthurman at |
72,465 |
6,220 |
2007-09-11 20:37:46 |
tcenter.ulp |
Dieses ULP platziert im Board die Bauteiltexte NAME und VALUE mittig zum
Origin des Bauteils. Dabei werden die Textparameter (Size, Ratio,
Orientierung) geändert. Nach dem Aufruf des 'tcenter.ulp' einfach den
Script tcenter.scr starten. Die Textparameter können im ULP eingestellt
werden. Version 1.02 funktioniert jetzt auch mit EAGLE 5.x.
Uploaded by Richard Hammerl (support at |
6,852 |
3,699 |
2009-06-22 10:55:27 |
teardrops1.ulp |
This ulp was modified from via-teardrops1.ulp written by Tad Artis originally. Limited support was added to allow teardrops for throughole pads as well.
Uploaded by Bob Starr (rtzaudio at |
27,618 |
5,233 |
2008-01-14 01:39:08 |
teardrops2.ulp |
Teardrop PADS and VIAS! Improved support for teardropping of PADS to provide better fill with various pad sizes. Not perfect, but should give fairly usable results now.
Uploaded by Bob Starr (rtzaudio at |
28,026 |
5,210 |
2009-06-18 17:57:49 |
teilelst.ulp |
Diese ULP erzeugt aus einem Board eine Teileliste incl. Preisen der wichtigsten Bauteile und einer Zusammenfassung xx * 10k Rxx,Ryy usw.
Passend f. Tabellenkalkulationen. Uploaded by Peter Fuchs (peter dot fuchs at |
20,151 |
5,109 |
1999-07-07 10:04:45 |
testpnts+vias.ulp |
Modified netlist ULP to include x,y locations of pads, useful for making automatic pcb testing fixtures. This version additionally informs about the location of vias. For EAGLE 3.5 and higher.
Uploaded by Richard Hammerl (ric at |
2,457 |
4,871 |
2005-09-29 09:14:58 |
testpnts.ulp |
Modified netlist ULP to include x,y locations of pads, useful for making automatic pcb testing fixtures. Uploaded by Joel Parkinson (jparkinson at |
2,220 |
4,870 |
2005-09-29 09:14:58 |
traceres.ulp |
This ULP calculates the resistance and current capacity of all traces on a board. The result is a text overlay that makes a good visual aid.
Uploaded by Chris Holmes (christopher dot d dot holmes at |
23,100 |
7,427 |
2004-05-10 22:45:35 |
ulp_querydigikey.inc |
ULP Include file. Provides the function QueryDigikey(). Given a Digikey part number, it returns the quantity available and pricing information.
Uploaded by Alex Mykyta (aim6864 at |
3,386 |
1,920 |
2011-03-14 02:47:37 |
ultimatefind.zip |
Two files included:
FindFrst - an updated find.ulp
FindNext - repeat the last find
Notable improvements: 1. Wildcard searches, such as C* 2. Find next using FindNext.ULP (FindFrst.ulp creates a list of finds based on your criteria, and FindNext steps through the finds) 3. Auto-Invokes INFO if selected 4. Improved zoom function (selects between regular and 2x) 5. Creates a list of finds, used to check parts quickly - best used with wildcard finds. 6. Better control over found elements (nets, pin names, pin numbers, reference designators, etc). FIND.ULP is very bad selective searches. RECOMMEND USAGE: Assign FindFrst.ULP to F12 Assign FindNext.ULP to Control+F12 - Hit F12 to find R* - Hit control+F12 to cycle through all the found elements. *any suggestions are welcome* Uploaded by Claudio Irrgang (layout at |
6,366 |
5,510 |
2004-03-10 06:35:14 |
ultimatefind_v1.1.zip |
ultimatefind_v1.1.zip. Bugfix. To mutch zoom when the grid was not inches
Uploaded by Øyvind Eggen (oyvind67 at |
6,609 |
5,667 |
2004-07-05 12:42:43 |
unidat.ulp |
Generates output in UNIDAT format which is used by UNICAM software. This software provides data for automatic mounting and test equipment. Uploaded by Rudi Hofer (rudi dot hofer at |
20,110 |
4,503 |
1999-04-28 11:32:21 |
unidat.zip |
Generates output in UNIDAT format which is used by UNICAM software. This software provides data for automatic mounting and test equipment.
This version corrects the month value in exported data. Uploaded by A. Zaffran (alf at |
7,757 |
5,458 |
2004-08-31 13:21:09 |
unidat20.ulp |
UNIDAT output with one shape per package
type (allows package libraries). Uploaded by Rudi Hofer (rudi at |
21,101 |
4,458 |
1999-09-10 11:06:50 |
unidat21.ulp |
Unidat output for EAGLE 4. Please read the info in the file's header. Uploaded by Richard Hammerl (ric at |
21,406 |
4,536 |
2001-04-06 11:34:05 |
unrouted.ulp |
UNROUTED.ULP determines tiny (and therefore maybe invisible) unrouted signals. Uploaded by Daemon Reinhard (yum at |
1,917 |
9,354 |
1997-02-27 16:56:35 |
unrouted2.ulp |
The unrouted.ulp has been altered to reduce the large number of airwires that can easly be created. The script generates 'unrouted.txt' and 'correct.scr' files.
By running the last one, it can wire all airwires that satisfy cirtain criteria.
Doesn't work properly in all circumstances but can be still effectively used. Uploaded by Levente Torok (lee at |
4,367 |
7,305 |
2000-06-16 20:45:00 |
update-symbol-pinname-overstrike.ulp |
This script for Eagle 5.0 loops through all library pins in a symbol(s) and converts old style inverted pin names (active low) to use the new overstrike symbol '!' feature supported in Eagle 5.0. The ULP looks for pin names sequences using the '\', '*', or '#' characters and converts these to the new '!' sequence as appropriate
Uploaded by Bob Starr (rtzaudio at |
4,812 |
3,912 |
2008-04-08 21:49:34 |
updateman.zip |
Updatemanager für ein 'echtes' Update auf Eagle 4.0x mit korrekten Packages und Umwandlung von Devices in Device-Sets. (Update v1.3)
Uploaded by Walter Mücke (hochberg3 at |
37,624 |
4,829 |
2002-11-13 00:31:03 |
updateman_to4.1x.zip |
Updatemanager für ein 'echtes' Update auf Eagle 4.1x mit korrekten Packages und Umwandlung von Devices in Device-Sets. (Update v1.4)
Uploaded by Walter Mücke (hochberg3 at |
37,784 |
4,767 |
2003-09-19 13:20:19 |
updateman_to_4.14.zip |
Updatemanager für ein 'echtes' Update auf Eagle 4.14 und höher mit korrekten Packages und Umwandlung von Devices in Device-Sets.
Mit: REPLACE im Schaltplan! (Update v2.23)
Update manager for a 'real' update on Eagle 4.14 and higher with correct packages and converting of devicess in devices sets. With REPLACE in the schematic! (update v2.23) Uploaded by Walter Mücke (hochberg3 at |
81,255 |
5,144 |
2006-12-14 12:08:43 |
used_layers.ulp |
collects all layers used in a board and shows them
in a "SET USED_LAYERS" dialog box. This is useful to
disable *some* layers but keep the others.
Uploaded by Daniel Mack (daniel at |
823 |
31,919 |
2005-12-05 13:31:34 |
via-fill.ulp |
An ulp that will place vias in a rectilinear or staggered grid inside any polgons of specified nets. Used to provide thermal or hf frequency vias to a board.
Uploaded by Philip Pulle (rgbphil at |
12,952 |
5,037 |
2006-12-05 03:15:56 |
via_teardrops1.ulp |
Teardrop Via Connections - Release: 1 -
This ULP allows creation of teardrop-shaped connections from a board's vias to their attached wire segments. Making these connections teardrop shaped enhances manufacturability and reduces board failure by ensuring connectivity between the segment and via in cases where the via hole is not accurately drilled and would otherwise sever the segment. Uploaded by Tad Artis (e3eagle_removethis at |
14,022 |
6,386 |
2006-08-31 01:35:49 |
vias.ulp |
Program that counts the number of vias and its location in a board Uploaded by Cisneros Loeza Luis Enrique (l dot cisneros-loeza dot siemens dot com) from Siemens SA DE CV |
446 |
5,119 |
1998-11-27 17:20:15 |
viscomnew.ulp |
This ULP program generated CAD data for optical inspection system VISCOM Uploaded by Milan Trubelik (trubelik at |
2,246 |
4,512 |
1999-05-06 06:54:42 |
wavepallet.ulp |
Generates a script to draw a keepout area around through hole pads, to help SMD layout when using selective wave soldering pallets. Only works with round, square and octagon pads at present.
Uploaded by Ben Heggs (ben dot heggs at |
5,101 |
2,916 |
2010-06-09 14:37:53 |
wirelist.ulp |
WIRELIST.ulp produces an optimum length, "wire run" SIGNAL List/Script File, for wire-wrapping or soldering proto and project boards. The resulting SCR can be executed to reroute a duplicate board layout into the equivalent "wired version".
See instructions in ULP header.
Uploaded by Joseph Zeglinski (j dot zeglinski at |
9,837 |
41,249 |
2005-09-13 18:31:21 |
xfind.ulp |
Search for objects, create lists, export as csv, create scripts, show find results on drawing...
Uploaded by Walter Müller (wm2 at |
55,736 |
3,996 |
2009-04-06 14:18:37 |
xpart.ulp |
Part Locater for a Board or Schematic
finds and zooms in. From the command line enter: RUN XPART part_name Uploaded by Michael Clynes (mclynes at |
3,143 |
4,976 |
2001-01-27 02:47:24 |
xref.zip |
Produces a Crossreference that tells you where Layout Parts are
located in Shematic. Useful with larger Designs.
Needs special Frame that is included.
Uploaded by Adrianus den Toom (adrianus at |
4,349 |
5,549 |
1997-10-24 22:00:34 |
zoom-unrouted.ulp |
simple script to zoom to the first unrouted wire in
board editor.
this might be helpful when searching for tiny left-
overs in the end phase of routing work.
Uploaded by Daniel Mack (daniel at |
945 |
8,723 |
2005-09-08 11:46:03 |